huawei - router-switch.com · 2018-07-16 · huawei ap8050dn and ap8150dn are latest-generation...

Huawei AP8050DN&AP8150DN Access Points Datasheet

Huawei AP8050DN&AP8150DN Access Points Datasheet 01

Product Overview............................................................................................................................. //

Huawei AP8050DN and AP8150DN are latest-generation 802.11ac wave 2 outdoor access points (APs) that

support 2 x 2 MU-MIMO and two spatial streams and offer high flexibility with IEEE 802.11a/b/g/n/ac compliance.

Both APs are physically hardened and feature enhanced outdoor coverage performance. They offer services

simultaneously on 2.4 GHz and 5 GHz radios to connect more users, support wireless bridging, built-in Bluetooth

(BLE4.1), and provide gigabit access for wireless users. The AP8050DN andAP8150DN provide comprehensive

service support capabilities and feature high reliability, high security, simple network deployment, automatic

Access Controller (AC) discovery and configuration, and real-time management and maintenance, which meet

outdoor network requirements. They are recommended for use in coverage scenarios (for example, high-density

stadiums, squares, pedestrian streets, and amusement parks) and bridging scenarios (for example, wireless

harbors, data backhaul, video surveillance, and train-to-ground backhaul).

AP8050DN AP8150DN

ˉ 802.11ac wave 2 standards compliance, MU-MIMO (2SU-2MU), delivering services simultaneously on 2.4G and 5G radios; 400

Mbit/s at 2.4 GHz; 867 Mbit/s at 5 GHz; and 1.267 Gbit/s for the device

ˉ The AP8150DN can switch from the 2.4 GHz frequency band to the 5 GHz frequency band. When working at dual 5 GHz frequency

bands simultaneously, the AP provides a system rate of 1.73 Gbit/s and can function as a relay AP to implement wireless bridging

functions, which reduces costs and improves device installation efficiency.

ˉ Built-in Bluetooth, allowing for Bluetooth-based application extension.

ˉ Built-in 5 kA surge protectors; no additional surge protection device required. This design simplifies installation and saves costs.

ˉ Use a metal shell and heat dissipation design, adapt to a wide temperature range from -40°C to +65°C, provide 6 kA or 6 kV surge

protection capability on an Ethernet interface, and IP68 protection level, meeting industry-level use requirements.

ˉ Supports the Fat, Fit, and cloud modes and enables Huawei cloud-based management platform to manage and operate APs and

services on the APs, reducing network O&M costs.

Feature Descriptions........................................................................................................................ // MU-MIMO

The AP supports MU-MIMO. MU-MIMO technology allows an AP to send data to multiple STAs at the same time (currently, most

802.11n/11ac Wave 1 APs can only send data to one STA simultaneously). The technology marks the start of the 802.11ac Wave 2 era.

GE access

The APs support the 80-MHz bandwidth mode. Frequency bandwidth increase brings extended channels and more sub-carriers for data

transmission, and a 2.16-fold rate increase. Support for High Quadrature Amplitude Modulation (HQAM) at 256-QAM increases the 5 GHz

radio rate to 867 Mbit/s and the AP rate to 1.267 Gbit/s.


Dual-5G radio technology

The AP8150DN can switch from the 2.4 GHz frequency band to the 5 GHz frequency band. When working at dual 5 GHz frequency bands

simultaneously, the AP provides a system rate of 1.73 Gbit/s and a 20% higher concurrency rate. In addition, it can function as a relay AP

to implement wireless bridging functions, which reduces costs by 50%.

High-level protection

The APs have built-in 5 kA feeder surge protectors and require no external surge protective devices, which simplifies installation and lowers

costs. They use a metal shell, waterproof connectors, and an overall heat dissipation design, and provide IP67 dustproof and waterproof

protection to ensure stable and reliable operations.

Cloud-based management

Huawei Cloud Managed Network (CMN) Solution consists of the cloud management platform and a full range of cloud managed network

devices. The cloud management platform provides various functions including management of APs, tenants, applications, and licenses,

network planning and optimization, device monitoring, network service configuration, and value-added services.

High Density Boost technology

Huawei uses the following technologies to address challenges in high-density scenarios, including access problems, data congestion, and poor roaming experience:

• Interference suppression

ˉ Huawei's Clear Channel Assessment (CCA) optimization technology reduces the possibility of air interface resources shared by

multiple devices, allows higher user access, and improves the throughput.

• Air interface performance optimization

ˉ In high-density scenarios where many users access the network, increased number of low-rate STAs consumes more resources on

the air interface, reduces the AP capacity, and lowers user experience. Therefore, Huawei APs will check the signal strength of STAs during access and rejects access from weak-signal STAs. At the same time, the APs monitor the rate of online STAs in real

time and forcibly disconnect low-rate STAs so that the STAs can reassociate with APs that have stronger signals. The terminal

access control technology can increase air interface use efficiency and allow access from more users.

• 5G-prior access (Band steering)

ˉ The APs support both 2.4G and 5G frequency bands. The 5G-prior access function enables an AP to steer STAs to the 5 GHz

frequency band first, which reduces load and interference on the 2.4 GHz frequency band, improving the user experience.

• Load balancing between APs

ˉ After the load balancing function is enabled, the AC distributes users evenly to APs based on user quantity and traffic volume.

Traffic load is therefore balanced among APs to ensure stable AP performance.

• Smart roaming

ˉ Smart roaming technology is based on the 802.11k , 802.11v and 802.11r technologies and allows STAs to connect to APs with

stronger signals, improving user experience and the overall performance of the wireless network.

• Agile Beam ˉ Agile antenna polarization beam automatic adaption.


Wired and wireless dual security guarantee

To ensure data security, Huawei APs integrate wired and wireless security measures and provide comprehensive security protection.

• Authentication and encryption for wireless access

ˉ The APs support WEP, WPA/WPA2–PSK, WPA/WPA2–802.1x, and WAPI authentication/encryption modes to ensure security of the

wireless network. The authentication mechanism is used to authenticate user identities so that only authorized users can access network resources. The encryption mechanism is used to encrypt data transmitted over wireless links to ensure that the data can

only be received and parsed by expected users.

• Analysis on non-Wi-Fi interference sources

ˉ Huawei APs can analyze the spectrum of non-Wi-Fi interference sources and identify them, including baby monitors, Bluetooth

devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz

frequency bands), wireless game controllers, and microwave ovens. Coupled with Huawei eSight, the precise locations of the

interference sources can be detected, and the spectrum of them displayed, enabling the administrator to remove the interference

in a timely manner.

• Rogue device monitoring

ˉ Huawei APs support WIDS/WIPS, and can monitor, identify, defend, counter, and perform refined management on the rogue

devices, to provide security guarantees for air interface environment and wireless data transmission.

• AP access authentication and encryption

ˉ The AP access control ensures validity of APs. The CAPWAP link protection and DTLS encryption provide security assurance,

improving data transmission security between the AP and the AC.

Automatic radio calibration

Automatic radio calibration allows an AP to collect signal strength and channel parameters of surrounding APs and generate AP topology

according to the collected data. Based on interference from authorized APs, rogue APs, and non-Wi-Fi interference sources, each AP

automatically adjusts its transmit power and working channel to make the network operate at the optimal performance. In this way,

network reliability and user experience are improved.

Automatic application identification

Huawei APs support smart application control technology and can implement visualized control on Layer 4 to Layer 7 applications.

• Traffic identification

ˉ Coupled with Huawei ACs, the APs can identify over 1600 common applications in various office scenarios. Based on the

identification results, policy control can be implemented on user services, including priority adjustment, scheduling, blocking, and rate limiting to ensure efficient bandwidth resource use and improve quality of key services.

• Traffic statistics collection ˉ Traffic statistics of each application can be collected globally, by SSID, or by user, enabling the network administrator to know

application use status on the network. The network administrator or operator can implement visualized control on service applications on

smart terminals to enhance security and ensure effective bandwidth control.

Huawei AP8050DN&AP8150DN

Access Points Datasheet 04

Basic Specifications......................................................................................................................... //

Hardware specifications

Item Description

Technical

specifications

Dimensions (H x W x D) 100 mm x 220 mm x 220 mm

Weight AP8050DN: 2 kg

AP8150DN: 1.95 kg

Interface type

2 x 10/100/1000M self-adaptive Ethernet interface (RJ45)

1 x Management console port (RJ45)

1 x SFP fiber interface

Built-in Bluetooth BLE4.0

LED indicator Indicates the power-on, startup, running, alarm, and fault status of the system.

Power

specifications

Power input PoE power supply: in compliance with IEEE 802.3at

Maximum power consumption

18.0 W

The actual maximum power consumption depends on local laws and regulations.

Environmental specifications

Operating temperature –40°C to +65°C

Storage temperature –40°C to +85°C

Operating humidity 0% to 100% (non-condensing)

Altitude –60 m to +5000 m

Dustproof and waterproof grade IP68

Atmospheric pressure 53 kPa to 106 kPa

Radio specifications

Antenna type AP8050DN: built-in directional antennas (horizontal 60°, vertical30°) AP8150DN: external antennas (with eight type N connectors)

Antenna gain AP8050DN: 2.4 GHz: 10 dBi 5 GHz: 10 dBi

Maximum number of SSIDs for each radio

16

Maximum number of users ≤ 512

NOTE


Item Description

Radio specifications

Maximum transmit power

AP8050DN：

2.4G:27dBm (combined power)

5G:26dBm (combined power)

AP8150DN：

2.4G:26dBm (combined power)

5G:24dBm (combined power)

The actual transmit power depends on local laws and regulations.

Power increment 1 dBm

Receiver sensitivity

2.4 GHz 802.11b (CCK)：-100 dBm @ 1 Mb/s； -93 dBm @ 11 Mb/s

2.4 GHz 802.11g (non-HT20)：-94 dBm @ 6 Mb/s； -77 dBm @ 54 Mb/s

2.4 GHz 802.11n (HT20)：-94 dBm @ MCS0/8； -74 dBm @ MCS15

2.4 GHz 802.11n(HT40)：-91 dBm @ MCS0/8； -70 dBm @ MCS15

5 GHz 802.11a (non-HT20)：-92 dBm @ 6 Mb/s； -76 dBm @ 54 Mb/s

5 GHz 802.11n (HT20)：-91 dBm @ MCS0； -72 dBm @ MCS15

5 GHz 802.11n (HT40)：-89 dBm @ MCS8； -70 dBm @ MCS15

5 GHz 802.11ac (VHT20)：-93 dBm @ MCS0NSS1； –69 dBm @ MCS8NSS2



NOTE


Basic Specifications......................................................................................................................... //

Software specifications

Fat/Fit AP mode

Item Description

WLAN features

Compliance with IEEE 802.11a/b/g/n/ac/ac Wave 2

Dual-5G for the AP8150DN, and maximum rate of 1.267 Gbit/s (AP8050DN) or 1.73 Gbit/s (AP8150DN)

Maximum ratio combining (MRC)

Space time block code (STBC)

Cyclic Delay Diversity (CDD)/Cyclic Shift Diversity (CSD)

Beamforming

MU-MIMO

Low-density parity-check (LDPC)

Maximum-likelihood detection (MLD)

Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)

802.11 dynamic frequency selection (DFS)

Short guard interval (GI) in 20 MHz, 40 MHz, and 80 MHz modes

Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding

Automatic and manual rate adjustment

WLAN channel management and channel rate adjustment

Automatic channel scanning and interference avoidance

Service set identifier (SSID) hiding

Signal sustain technology (SST)

Unscheduled automatic power save delivery (U-APSD)

Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode

Automatic login in Fit AP mode

Extended Service Set (ESS) in Fit AP mode

Wireless distribution system (WDS) in Fit AP mode

Mesh networking in Fit AP mode

Multi-user CAC

Hotspot2.0

802.11k and 802.11v smart roaming

802.11r fast roaming (≤ 50 ms)

WAN authentication escape. In local forwarding mode, this function retains the online state of existing STAs and allows access of new STAs when APs are disconnected from an AC, ensuring service continuity.


Item Description

Network features

Compliance with IEEE 802.3ab

Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)

Compliance with IEEE 802.1q

SSID-based VLAN assignment

VLAN trunk on uplink Ethernet ports

Management channel of the AP uplink port in tagged and untagged mode

DHCP client, obtaining IP addresses through DHCP

Tunnel data forwarding and direct data forwarding

STA isolation in the same VLAN

Access control lists (ACLs)

Link Layer Discovery Protocol (LLDP)

Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode

Unified authentication on the AC in Fit AP mode

AC dual-link backup in Fit AP mode

Network Address Translation (NAT) in Fat AP mode

IPv6 in Fit AP mode

Soft Generic Routing Encapsulation (GRE)

IPv6 Source Address Validation Improvements (SAVI)

QoS features


WMM parameter management for each radio

WMM power saving

Priority mapping for upstream packets and flow-based mapping for downstream packets

Queue mapping and scheduling

User-based bandwidth limiting

Adaptive bandwidth management (automatic bandwidth adjustment based on the user quantity and radio environment) to improve user experience

Smart Application Control (SAC) in Fit AP mode

Airtime scheduling

Support for Microsoft Lync APIs and high voice call quality through Lync API identification and scheduling


Item Description

Security features

Open system authentication

WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key

WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)

WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)

WPA-WPA2 hybrid authentication

WAPI authentication and encryption

Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, and STA/AP blacklist and whitelist

802.1x authentication, MAC address authentication, and Portal authentication

DHCP snooping

Dynamic ARP Inspection (DAI)

IP Source Guard (IPSG)

802.11w Protected Management Frames (PMFs)

Application identification

Maintenance

features

Unified management and maintenance on the AC in Fit AP mode

Automatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode

WDS zero-configuration deployment in Fit AP mode

Mesh network zero-configuration deployment in Fit AP mode

Batch upgrade in Fit AP mode

Telnet

STelnet using SSH v2

SFTP using SSH v2

Local AP management through the serial interface

Web local AP management through HTTP or HTTPS in Fat AP mode

Real-time configuration monitoring and fast fault location using the NMS

SNMP v1/v2/v3 in Fat AP mode

System status alarm

Network Time Protocol (NTP) in Fat AP mode

BYOD

The AP supports bring your own device (BYOD) only in Fit AP mode.

Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address.

Identifies the device type according to the user agent (UA) information in an HTTP packet.

Identifies the device type according to DHCP options.

The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets.

NOTE


Item Description

Location service

The AP supports the locating service only in Fit AP mode.

Locates tags manufactured by AeroScout or Ekahau.

Locates Wi-Fi terminals.

Works with eSight to locate rogue devices.

Spectrum analysis

The AP supports spectrum analysis only in Fit AP mode.

Identifies interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwaves.

Works with eSight to perform spectrum analysis on interference sources.

Cloud-based management mode

Item Description

WLAN features

Compliance with IEEE 802.11a/b/g/n/ac/ac Wave 2

Dual-5G for the AP8150DN, and maximum rate of 1.267 Gbit/s (AP8050DN) or 1.73 Gbit/s (AP8150DN)

Maximum ratio combining (MRC)

Space time block code (STBC)

Beamforming

Low-density parity-check (LDPC)

Maximum-likelihood detection (MLD)

Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)

802.11 dynamic frequency selection (DFS)


WLAN channel management and channel rate adjustment

For detailed management channels, see the Country Code & Channel Compliance Table.

Automatic channel scanning and interference avoidance

Service set identifier (SSID) hiding

Signal sustain technology (SST)

Unscheduled automatic power save delivery (U-APSD)

Automatic login

NOTE

NOTE

NOTE


Item Description

Network features

Compliance with IEEE 802.3ab

Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)

Compliance with IEEE 802.1q

SSID-based VLAN assignment

DHCP client, obtaining IP addresses through DHCP

STA isolation in the same VLAN

Access control lists (ACLs)

Unified authentication on the Agile Controller

Network Address Translation (NAT)

QoS features


WMM parameter management for each radio

WMM power saving

Priority mapping for upstream packets and flow-based mapping for downstream packets

Queue mapping and scheduling

User-based bandwidth limiting

Airtime scheduling

Security features

Open system authentication

WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key

WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)

WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)

WPA-WPA2 hybrid authentication

802.1x authentication, MAC address authentication, and Portal authentication

DHCP snooping

Dynamic ARP Inspection (DAI)

IP Source Guard (IPSG)


Item Description

Maintenance features

Unified management and maintenance on the Agile Controller

Automatic login and configuration loading, and plug-and-play (PnP)

Batch upgrade

Telnet

STelnet using SSH v2

SFTP using SSH v2

Local AP management through the serial interface

Web local AP management through HTTP or HTTPS

Real-time configuration monitoring and fast fault location using the NMS

System status alarm

Network Time Protocol (NTP)

Standards compliance

Item Description

Safety standards UL 60950–1 CAN/CSA 22.2 No.60950-1 IEC 60950–1

EN 60950–1 GB 4943

Radio standards ETSI EN 300 328 ETSI EN 301 893 RSS-210 AS/NZS 4268

EMC standards

EN 301.489–1 EN 301.489–17 ETSI EN 60601-1-2 ICES-003

YD/T 1312.2-2004 ITU k.20 GB 9254 GB 17625.1

AS/NZS CIPSR22 EN 55022 EN 55024 IEC61000-4-6

IEC61000-4-2

IEEE standards

IEEE 802.11a/b/g IEEE 802.11n IEEE 802.11ac

IEEE 802.11h IEEE 802.11d IEEE 802.11e

IEEE 802.11k IEEE 802.11u IEEE 802.11v

IEEE 802.11w IEEE 802.11r

Security standards

802.11i，Wi-Fi Protected Access 2(WPA2)，WPA

802.1X

Advanced Encryption Standards(AES)，Temporal Key Integrity Protocol(TKIP)

EAP Type(s)

EMF CENELEC EN 62311 CENELEC EN 50385 OET65

RSS-102 FCC Part1&2 FCC KDB Series

RoHS Directive 2002/95/EC & 2011/65/EU

REACH Regulation 1907/2006/EC

WEEE Directive 2002/96/EC & 2012/19/EU


AP8050DN Antennas Pattern

2.4G (PHI=0) 2.4G (PHI=90)

5G (PHI=0)


Professional Service and Support

Huawei WLAN planning tools deliver expert network design and optimization services using the most professional simulation platform

in the industry. Backed by fifteen years of continuous investment in wireless technologies, extensive network planning and optimization

experience, and rich expert resources, Huawei helps customers:

ˉ Design, deploy, and operate a high-performance network that is reliable and secure.

ˉ Maximize return on investment and reduce operating expenses.

More Information

For more information, please visit http://e.huawei.com or contact your local Huawei office.

Enterprise Services Product Overview Marketing Documentation

http://e.huawei.com/

Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademark Notice

, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners.

General Disclaimer

The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.

huawei - router-switch.com · 2018-07-16 · huawei ap8050dn and ap8150dn are latest-generation...

Documents