pghu eh lspds 002004 rev 0

PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011

Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004

of 43 Rev 0

SCOPE

1) This Project Design Specification (PDS) contains the Line Class 300 tables that accompany PG-PDS 03-01-01. Additional valve information is contained in PG-PDS 03-20-10.

2) This Project Design Specification (PDS) covers the basic requirements for the design of piping systems for onshore production and processing facilities covered by ASME B31.3.



of 43 Rev 0

TABLE OF CONTENTS

1. REQUIRED REFERENCES.................................................................................... 4

1.1. Project Design Specifications ....................................................................... 4

1.2. API – American Petroleum Institute.............................................................. 4

1.3. ASME – American Society of Mechanical Engineers ................................... 4

1.4. ASTM – American Society for Testing and Materials ................................... 5

1.5. MSS – Manufacturers Standardization Society ............................................ 6

1.6. Calculations.................................................................................................. 6

2. CLASSIFICATION SHEETS................................................................................... 7

2.1. Class 300: Carbon Steel (Sweet Service) B1E............................................. 7

2.2 Class 300: LT Carbon Steel (Sweet Service) B5E ..................................... 18

2.2 Class 300: Stainless Steel–Process Piping B11A ...................................... 29

2.3 Class 300: Stainless Steel–Process Piping B11A(X).................................. 37

APPENDIX: NOTES TO PIPING LINE CLASS 300 ..................................................... 41

ATTACHMENT: PURPOSE CODE DEFINITIONS...................................................... 42

RECORD OF CHANGE ................................................................................................ 43



of 43 Rev 0

1. REQUIRED REFERENCES

1) This Section lists the Practices, codes, standards, specifications, and publications that shall be used with this document. Unless otherwise specified herein, use the latest edition.

2) The text of the numbered "Notes" referenced in the classification sheets is found in the Appendix of PG-PDS 03-01-01. A dagger (†) is used to identify such notes in this PDS.

1.1. Project Design Specifications

PGHU-EH-LSPDS-000101 PG-PDS 03-01-01 Upstream Piping Component Selection and System Design

PGHU-EH-LSPDS-002010 PG-PDS 03-20-10 Upstream Piping Classifications – Valve Indices and Descriptions

PGHU-EH-LSPDS-001902 PG-PDS 03-19-02 Upstream Piping Fabrication, Erection, Inspection, Testing, and Cleaning

1.2. API – American Petroleum Institute

API SPEC 5L Specification for Line Pipe

API SPEC 6D Petroleum and Natural Gas Industries – Pipeline Transportation Systems – Pipeline Valves

API STD 594 Check Valves: Wafer, Wafer-Lug, and Double-flanged Type

API STD 600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries

API STD 602 Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries

API STD 609 Butterfly Valves: Double-Flanged, Lug-, and Wafer-Type

1.3. ASME – American Society of Mechanical Engineers

ASME B16.5 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard

ASME B16.9 Factory-Made Wrought Buttwelding Fittings

ASME B16.11 Forged Fittings, Socket-Welding and Threaded

ASME B16.20 Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed

ASME B16.34 Valves – Flanged, Threaded, and Welding End

ASME B16.36 Orifice Flanges

ASME B16.47 Large-Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard

ASME B16.48 Line Blanks

ASME B18.2.1 Square and Hex Bolts and Screws (Inch Series)

ASME B18.2.2 Square and Hex Nuts (Inch Series)

ASME B31.3 Process Piping



of 43 Rev 0

ASME B36.10M Welded and Seamless Wrought Steel Pipe

ASME B36.19M Stainless Steel Pipe

1.4. ASTM – American Society for Testing and Materials

ASTM A 105/A 105M Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A 106/A 106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

ASTM A 182/A 182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

ASTM A 193/A 193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A 194/A 194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

ASTM A 216/A 216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

ASTM A 234/A 234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A 240/A 240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

ASTM A 312/A 312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A 320/A 320M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service

ASTM A 333/A 333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

ASTM A 350/A 350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

ASTM A 351/A 351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

ASTM A 352/A 352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

ASTM A 358/A 358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

ASTM A 403/A 403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A 420/A 420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A 516/A 516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

ASTM A 671 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures



of 43 Rev 0

1.5. MSS – Manufacturers Standardization Society

MSS SP-97 Integrally Reinforced Forged Branch Outlet Fittings – Socket Welding, Threaded, and Buttwelding Ends

1.6. Calculations

PGHU-CV-LCCAL-000001

Pipe Wall Thickness Calculations

PGHU-CV-LCCAL-000002

Blank Thickness Calculations



of 43 Rev 0

2. CLASSIFICATION SHEETS

The text of the numbered "Notes" referenced in the classification sheets is found in the Appendix of PG-PDS 03-01-01. A dagger (†) is used to identify such notes in this PDS.

2.1. Class 300: Carbon Steel (Sweet Service) B1E

Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet

Service General process, hydrocarbons, glycol, chemicals, produced water, closed drains, steam

Pipe Material Carbon steel

Corrosion Allowance 3.00mm

Valve Material Carbon steel

Valve Trim 13 Cr, except ball valves have 316 SS balls

ASME Pressure Class 300

Design Code ASME B31.3

PWHT Not required, except for wall thickness greater than 19 mm (¾ in.)

Pressure/Temperature Limits

(See Note 6†)

Limits based upon flange ratings, unless noted otherwise

(C) (kPa-g) (F) (psig)

−29 to +38 5102 −20 to +100 740

93 4688 200 680

149 4516 300 655

177 4445 350 645

204 4378 400 635

Limits based upon A105 flange ratings, unless noted otherwise.

(*) Reference to PG-PDS 03-01-01, Appendix E, Note 6, Clause g), Temperature Range Restrictions for Elastomers in this Line Class are indicated below the valve ID No.

310 3950 590 573


Valves Description ASTM Specifications

ID No. Notes†

Ball Valves API SPEC 6D or ASME B16.34

NPS ½ – 1½, Class 800, SW, reduced bore, 316 SS ball/trim, PTFE seats, fire-safe design NPS ½ –1½, Class 800, SW x SE, ditto

ASTM A 105/A 105M ASTM A 105/A 105M

YBAA5 YBAA7

2, 3, 6, 7, 9, 11, 21, 28, 30

Ball Valves API SPEC 6D

NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid

ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB

BBAA0(02) (177°C)* BBAA0(02) (177°C)*

2, 3, 6, 7, 8, 9, 11, 20, 21, 28



of 43 Rev 0



ID No. Notes†

and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAA9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – HNBR, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – HNBR, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim , main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design

ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB

BBAA0(01) (177°C)* BBAA0(12) (150°C)* BBAA0(12) (150°C)* BBAA0(32) (177°C)* BBAA0(32) (177°C)* BBAA0(02)-(M) (177°C)* BBAA0(02)-(M) (177°C)*



of 43 Rev 0



ID No. Notes†

NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAA9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design

ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB

BBFA0(02) (177°C)* BBFA0(02) (177°C)* BBFA0(01) (177°C)* BBFA0(32) (177°C)* BBFA0(32) (177°C)* BBFA0(32)-(M) (177°C)* BBFA0(32)-(M) (177°C)* BBFA0(02)-(M) (177°C)*



of 43 Rev 0



ID No. Notes†

NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAA9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design


BBFA0(02)-(M) (177°C)* BBAA0(31) (177°C)* BBAA0(21) (204°C)* BBAA0(21)-(31) (204°C)* BBAA0(22) (204°C)* BBAA0(22) (204°C)* BBAA0(22)-(32) (204°C)* BBAA0(22)-(32) (204°C)*



of 43 Rev 0



ID No. Notes†

NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAA9, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats -


BBAA0(22)-(32)-(M) (204°C)* BBAA0(22)-(32)-(M) (204°C)* BBAA0(22)-(M) (204°C)* BBAA0(22)-(M) (204°C)* BBFA0(21) (204°C)* BBFA0(21)-(31) (204°C)* BBFA0(31) (177°C)* BBFA0(22) (204°C)*



of 43 Rev 0



ID No. Notes†

RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design

ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB

BBFA0(22) (204°C)* BBFA0(22)-(32) (204°C)* BBFA0(22)-(32) (204°C)* BBFA0(22)-(32)-(M) (204°C)* BBFA0(22)-(32)-(M) (204°C)* BBFA0(22)-(M) (204°C)* BBFA0(22)-(M) (204°C)*



of 43 Rev 0



ID No. Notes†

NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - Metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - Metal seats, other seals – Viton, with weld overlay, fire-safe design


BBAA0(32)-(M) (177°C)* BBAA0(32)-(M) (177°C)*

Ball Valves (optional for clean service only) API SPEC 6D

NPS 6 – 36, Class 300, RF, reduced bore, ASTM A 105/A 105M ENP-plated ball/seat pockets and body-stem seal area, nylon seats, other seals-Viton fire-safe design NPS 6–36, Class 300, RF, full bore, ditto

ASTM A 105/A 105M or ASTM A 216/A 216M WCB ASTM A 105/A 105M or ASTM A 216/A 216M WCB

BBAA0(P) (177°C)* BBFA0(P) (177°C)*

2, 3, 6, 7, 8, 11, 17, 20, 21, 28

Check Valves API STD 602

NPS ½ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), swing-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto NPS ¾ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), piston-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M

YCAA5 BCAA0 YCNA5 BCNA0

25, 27


NPS 3 – 10, Class 300, RF, retainerless dual plates, through-drilled solid lugs, integral metal seat, Inconel springs, CS plates and 316 SS pins NPS 12 – 24, Class 300, RF, retainerless dual plates, double-flanged, integral metal seat, Inconel springs, CS plates and 316 SS pins


BCYA0 BCYA0

23, 24, 25

Check Valves API SPEC 6D

NPS 2 – 24, Class 300, RF, BC, swing-type (piggable), 13 Cr Trim, HF seat

ASTM A 216/A 216M WCB

BCFA0 8, 25, 26



of 43 Rev 0



ID No. Notes†


NPS 2, Class 300, RF, BC, swing-type (non-piggable), Trim 8, integral HF seat


BCAA0 25, 26, 29

Globe Valves API STD 602

NPS ¾ – 1½, Class 800, SW, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 105/A 105M ASTM A 105/A 105M

YTAA5 BTAA0

28


NPS 2 – 12, Class 300, RF, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing


BTAA0 3, 28, 29

Butterfly Valves API STD 609

NPS 10, Class 300, RF, through-drilled lugs, CS disc, 316 SS seal ring, CS body, graphitic packing NPS 12-24, Class 300, RF, double-flanged, CS disc, 316 SS seal ring, CS body, graphitic packing


BFAA0 BFAA0

2, 3, 7, 8, 11, 28

Gate Valves API STD 602

NPS ¾ – 1½, Class 800, SW, BB, OS&Y, API trim 8 (13 Cr), standard port, graphitic packing NPS ¾ -1, Class 800, SW x SE, BB, OS&Y, API trim 8 (13 Cr), standard port, graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M

YGAA5 YGAA7 BGAA0

22, 28


NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 8 (13 Cr), standard port, graphitic packing NPS 6-24, Class 300, RF, BB, OS&Y, flexible wedge with cavity relief, integral flange, API trim 8 (13 Cr), standard port, graphitic packing


BGAA0 BGAA0

3, 22, 28, 29

Gate Valves API SPEC 6D

NPS 2 – 24, Class 300, RF, BB, OS&Y, Through-conduit slab gate, floating HF seats


BGFA0 3, 8, 22, 28, 29

Instrument Connection Valves

NPS ½ – 2, applies to the first-block valve (or double-block valve where required). See Note 4 for additional requirements and information.

4



of 43 Rev 0



ID No. Notes†

Instrument Double Isolation Valves (Monoblok) Manufacturer’s standard

NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, fire-safe design NPS 2, Class 300, RF, single body with two obturators and a bleed, standard bore, DN 50 body, CS body, Metal Seats, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, metal seats, fire-safe design NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, metal seats, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, metal seats, fire-safe design

ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M

BSAA10 BSAA10(04) BSAA0(M) BSAA10(04)-(M) BSAA10(M) BSAA10(06) BSAA10(06)-(M)

2, 3, 4, 30

† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.



of 43 Rev 0


Component/ Standard Description ASTM Specifications Notes†

Bolting ASME B18.2.1 and ASME B18.2.2

Stud bolts Heavy, semi-finished, hex nuts

ASTM A 193/A 193M B7, ASTM A 194/A 194M 2H

80

Flanges ASME B16.5

NPS ½ – 1½, Class 300, RF, SW NPS 2 – 24, Class 300, RF, WN, bore to match pipe

ASTM A 105/A 105M 86

Orifice Flanges ASME B16.36

NPS 2–24, Class 300, RF, WN, bore to match pipe

ASTM A 105/A 105M 86

Gaskets ASME B16.20

Class 300, spiral wound, CS centering ring, 304 SS windings, flexible graphite filler, inner ring for all sizes

60

Fittings ASME B16.11

NPS ½ – 1½, SW, Sch. 160 and lighter–Class 3000, Sch. XXS and heavier–Class 6000

ASTM A 105/A 105M 53, 54, 62, 86

Fittings ASME B16.9

NPS 2 –16, SMLS, BW, same thickness as pipe NPS 18-24, BW, WELDED

ASTM A 234/A 234M WPB ASTM A420/A420M WPL6

55, 56

Branch Outlet: MSS SP-97

NPS ½ – 1½, sockolet, SW outlet, Class 3000 for Sch. 160 and lighter, Class 6000 for Sch. XXS NPS 2 – 6, weldolet, BW outlet to match branch wall

ASTM A 105/A 105M 53, 62, 86

Pipe ASME B36.10M

NPS ½ – 16, seamless, thickness (see below) NPS 18 – 24, EFW, Class 22, Normalized, (Impact tested for -29°C (-20°F) service, for pipe Thk > 31.8mm)

ASTM A 106/A 106M B ASTM A671 CC65-S2

51, 52, 53, 54, 63

Spectacle Blind / Paddle Blank / Spacers ASME B16.48

NPS 1-24, RF, Class 300 Impact test for -29°C service for Thk > 31.8mm

ASTM A516 Gr. 65, Normalized (Refer Table 4 PG-PDS 03-01-01 for the type)




of 43 Rev 0


Corrosion Allowance (C.A.) (see Appendix Note 87)

E C.A. = 3.0 mm (0.12 in.)

NPS Sch.

½ XXS

¾ – 2 160

3 – 6 80

8 – 24 40

Class 300—Carbon Steel (Sweet Service) B1E Classification Sheet

Branch Table

24 BWT

20 BRT BWT

18 BRT BRT BWT

16 RB BRT BRT BWT

14 RB RB BRT BRT BWT

12 RB RB RB BRT BRT BWT

10 RB RB RB RB BRT BRT BWT

8 RB RB RB RB RB BRT BRT BWT

6 WOL WOL WOL WOL WOL WOL BRT BRT BWT

4 WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT

3 WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT

2 WOL WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT

1½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL BRT SWT

1 SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SWT

¾ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SWT

B

R

A

N

C

H

S

I

Z

E

S

N

P

S ½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SRT SWT

24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½

H E A D E R S I Z E S – N P S

Legend:

SOL = Socket Weld O-let Fitting SRT = Socket Weld Reducing Tee RB = Reinforced Branch

SWT = Socket Weld Tee WOL = Buttweld O-let Fitting

BRT = Buttweld Reducing Tee BWT = Buttweld Tee



of 43 Rev 0

2.2 Class 300: LT Carbon Steel (Sweet Service) B5E

Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet

Service General process, hydrocarbons, glycol

Pipe Material Impact-tested carbon steel (for low temperature service)

Corrosion Allowance 3.00mm

Valve Material Carbon steel

Valve Trim 13 Cr, except ball valves have 316 SS balls (See note above)



PWHT Yes, except for conditions specified elsewhere in project specifications



−46 to +38 4791 −50 to +100 695

93 4550 200 660

149 4412 300 640

177 4324 350 627

204 4240 400 615


(See Note 6†)

Limits based upon A352 LCB flange ratings, unless noted otherwise.


310 3812 590 553



ID No. Notes†


NPS ½ – 1½, Class 800, SW, reduced bore, 316 SS ball/trim, PTFE seats, fire-safe design NPS ½ –1½, Class 800, SW x SE, ditto

ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1

YBAB5 YBAB7

2, 3, 5, 6, 7, 9, 11, 21, 28, 30


NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity

ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB

BBAB0(02) (177°C)* BBAB0(02) (177°C)* BBAB0(01) (177°C)*

2, 3, 5, 6, 7, 8, 9 11, 20, 21, 28



of 43 Rev 0



ID No. Notes†

bleed valve FBAB9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – HNBR, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – HNBR, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim , main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed

ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB

BBFB0(12) (150°C)* BBFB0(12) (150°C)* BBAB0(32) (177°C)* BBAB0(32) (177°C)* BBAB0(02)-(M) (177°C)* BBAB0(02)-(M) (177°C)* BBFB0(02) (177°C)* BBFB0(02) (177°C)*



of 43 Rev 0



ID No. Notes†

phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAB9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design

ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB

BBFB0(01) (177°C)* BBFB0(32) (177°C)* BBFB0(32) (177°C)* BBFB0(32)-(M) (177°C)* BBFB0(32)-(M) (177°C)* BBFB0(02)-(M) (177°C)* BBFB0(02)-(M) (177°C)*



of 43 Rev 0



ID No. Notes†

NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAB9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design

NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, with weld

ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB

BBAB0(31) (177°C)* BBAB0(21) (204°C)* BBAB0(21)-(31) (204°C)* BBAB0(22) (204°C)* BBAB0(22) (204°C)* BBAB0(22)-(32) (204°C)* BBAB0(22)-(32) (204°C)* BBAB0(22)-(32)-(M) (204°C)*



of 43 Rev 0



ID No. Notes†

overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAB9, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design


BBAB0(22)-(32)-(M) (204°C)* BBAB0(22)-(M) (204°C)* BBAB0(22)-(M) (204°C)* BBFB0(21) (204°C)* BBFB0(21)-(31) (204°C)* BBFB0(31) (177°C)* BBFB0(22) (204°C)*



of 43 Rev 0



ID No. Notes†

NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design


BBFB0(22) (204°C)* BBFB0(22)-(32) (204°C)* BBFB0(22)-(32) (204°C)* BBFB0(22)-(32)-(M) (204°C)* BBFB0(22)-(32)-(M) (204°C)* BBFB0(22)-(M) (204°C)* BBFB0(22)-(M) (204°C)*



of 43 Rev 0



ID No. Notes†

Ball Valves (optional for clean service only) API SPEC 6D

NPS 6 – 36, Class 300, RF, reduced bore, ASTM A 350/A 350M LF2 Class 1 ENP-plated ball/seat pockets and body-stem seal area, nylon seats, other seals-Viton fire-safe design NPS 6 – 36, Class 300, RF, full bore, ditto

ASTM A 350/A 350M LF2 Class 1 or ASTM A 352/A 352M LCB ASTM A 350/A 350M LF2 Class 1 or ASTM A 352/A 352M LCB

BBAB0(P) (177°C)* BBFB0(P) (177°C)*

2, 3, 5, 6, 7, 8, 11, 17, 20, 21, 28


NPS ½ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), swing-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto NPS ¾ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), piston-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1

YCAB5 BCAB0 YCNB5 BCNB0

5, 25, 27


NPS 3 – 10, Class 300, RF, retainerless dual plates, through-drilled solid lugs, integral metal seat, Inconel springs, CS plates and 316 SS pins NPS 12 – 24, Class 300, RF, retainerless dual plates, double-flanged, integral metal seat, Inconel springs, CS plates and 316 SS pins

ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB

BCYB0 BCYB0

5, 8, 23, 24, 25


NPS 2 – 24, Class 300, RF, BC, swing-type (piggable), 13 Cr Trim, HF seat

ASTM A 352/A 352M LCB

BCFB0 5, 8, 25, 26


NPS 2, Class 300, RF, BC, swing-type (non-piggable), Trim 8, integral HF seat

ASTM A 352/A 352M LCB

BCAB0 5, 8, 25, 26, 29



of 43 Rev 0



ID No. Notes†


NPS ¾ – 1½, Class 800, SW, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1

YTAB5 BTAB0

5, 28


NPS 2 – 8, Class 300, RF, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing

ASTM A 350/A 350M LF2 Class 1

BTAB0 3, 5, 28, 29


NPS 10, Class 300, RF, through-drilled lugs, CS disc, 316 SS seal ring, LTCS body, graphitic packing NPS 12-24, Class 300, RF, double-flanged, CS disc, 316 SS seal ring, LTCS body, graphitic packing


BFAB0 BFAB0

2, 3, 5, 7, 8, 11, 28


NPS ¾ – 1½, Class 800, SW, BB, OS&Y, solid wedge, API trim 8 (13 Cr), standard port, graphitic packing NPS 1 – 2, Class 300, RF flgs, ditto NPS ¾ -1, Class 800, SW x SE, BB, OS&Y, solid wedge, API trim 8 (13 Cr), standard port, graphitic packing

ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1

YGAB5 BGAB0 YGAB7

3, 5, 22, 28


NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 8 (13 Cr), standard port, graphitic packing NPS 6-24, Class 300, RF, BB, OS&Y, flexible wedge with cavity relief, integral flange, API trim 8 (13 Cr), standard port, graphitic packing


BGAB0 BGAB0

3, 5, 8, 22, 28, 29



4


NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, fire-safe design


BSAB10

2, 3, 4, 5, 30



of 43 Rev 0



ID No. Notes†

NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, fire-safe design NPS 2, Class 300, RF, single body with two obturators and a bleed, standard bore, DN 50 body, LTCS body, Metal Seats, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, metal seats, fire-safe design NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, metal seats, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, metal seats, fire-safe design

ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1

BSAB10(04) BSAB0(M) BSAB10(04)-(M) BSAB10(M) BSAB10(06)

BSAB10(06)-(M)




of 43 Rev 0





ASTM A 320/A 320M L7 ASTM A 194/A 194M 4L

80

Flanges ASME B16.5

NPS ½ – 1½, Class 300, RF, SW NPS 2 – 24, Class 300, RF, WN, bore to match pipe



NPS 2 – 24, Class 300, RF, WN, bore to match pipe


Gaskets ASME B16.20

Class 300, spiral wound, CS centering ring, 304SS windings, flexible graphite filler, inner ring for all sizes

60


NPS ½ – 1½, SW, Sch. 160 and lighter–Class 3000 Sch. XXS and heavier–Class 6000


53, 54, 62

Fittings ASME B16.9

NPS 2 –16 , BW, SMLS, same thickness as pipe NPS 18-24, BW, Welded

ASTM A 420/A 420M WPL6

55, 56

Branch Outlet Fittings (O-lets) MSS SP-97

NPS ½ – 1½, branch outlet fitting, SW outlet, Class 3000 for Sch. 160 and lighter, Class 6000 for Sch. XXS NPS 2 – 6, branch outlet fitting, BW outlet to match branch wall


53, 62

Pipe ASME B36.10M

NPS ½ –16, seamless, thickness (see below) NPS18-24, EFW, Class 22, normalized (impact tested for–46C (–50F) service, for pipe Thk > 14.3mm)

ASTM A 333/A 333M Gr. 6 ASTM A 671 CC65-S2

51, 52, 53, 54, 63

Spectacle Blind / Paddle Blank / Spacer ASME B16.48

NPS 1-24, RF, Class 300, Impact test for -46°C service for Thk > 14.3mm

ASTM A516 Gr. 65, Normalized (Refer Table 4 PG-PDS 03-01-01 for the type)




of 43 Rev 0


Corrosion Allowance (C.A.) (see Appendix Note 87)

E C.A. = 3.0 mm (0.12 in.)

NPS Sch.

½ XXS

¾ – 2 160

3 – 6 80

8 – 24 40


Branch Table

24 BWT

20 BRT BWT

18 BRT BRT BWT

16 RB BRT BRT BWT





6 WOL WOL WOL WOL WOL WOL BRT BRT BWT

4 WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT

3 WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT


1½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL BRT SWT

1 SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SWT

¾ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SWT

B

R

A

N

C

H

S

I

Z

E

S

N

P

S ½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SRT SWT

24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½


Legend:

BWT = Buttweld Tee BRT = Buttweld Reducing Tee

SOL = Socket Weld O-let Fitting SWT = Socket Weld Tee

SRT = Socket Weld Reducing Tee WOL = Buttweld O-let Fitting

RB = Reinforced Branch



of 43 Rev 0

2.2 Class 300: Stainless Steel–Process Piping B11A

Class 300 – Stainless Steel–Process Piping B11A Classification Sheet

Service Corrosive hydrocarbons, chemicals, glycol, produced water, amines

Pipe Material 316L stainless steel

Corrosion Allowance 0mm

Valve Material 316L stainless steel (flanged), 316L stainless (SW, BW)

Valve Material 316 or 316L stainless steel for flanged valves

Valve Trim 316 stainless steel



PWHT No



−101 to 38 4136 −150 to +100 600

93 3516 200 510

149 3137 300 455

177 3013 350 437

204 2895 400 420

270 2688 518 390


(See Notes 6† & 33†)

Limits based upon 316L flange ratings, unless noted otherwise.


For blow-down scenario (short term condition), elastomer – Viton and HNBR are suitable to -70°C. 310 2586 590 375


Valves Description ASTM

Specifications ID No. Notes

†


NPS ½ – 1½, Class 800, SW, reduced bore, 316 SS ball/trim, reinforced PTFE seats, fire-safe design NPS ½ – 1½, Class 800, SW x SE, ditto NPS 1 – 1½, Class 300, RF, ditto

ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L ASTM A 182/A 182M F316

YBAK5 YBAK7 BBAJ0

2, 3, 6, 7, 9, 11, 21, 29, 30, 33, 58


NPS 2–8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE , other seals – Viton, fire-safe design

ASTM A 351/A 351M CF8M

BBAJ0(02) (-50°C to 177°C)*

2, 3, 6, 7, 8, 9, 11, 20, 21, 28, 33, 58



of 43 Rev 0




†

NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - metal seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - metal seats, other seals – Viton, fire-safe design NPS 2–6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2–8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE , other seals – HNBR, fire-safe design

ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M

BBAJ0(02) (-50°C to 177°C)* BBAJ0(01) (-50°C to 177°C)* BBAJ0(02)-(M) (-50°C to 177°C)* BBAJ0(02)-(M) (-50°C to 177°C)* BBFJ0(02) (-50°C to 177°C)* BBFJ0(02) (-50°C to 177°C)* BBFJ0(01) (-50°C to 177°C)* BBAJ0(12) (-50°C to 150°C)*



of 43 Rev 0




†

NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – HNBR, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals,

ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M

BBAJ0(12) (-50°C to 150°C)* BBAJ0(21) (204°C)* BBAJ0(22) (204°C)* BBAJ0(22) (204°C)* BBAJ0(22)-(M) (204°C)* BBAJ0(22)-(M) (204°C)* BBFJ0(21) (204°C)* BBFJ0(22) (204°C)*



of 43 Rev 0




†

liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design

ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M

BBFJ0(22) (204°C)* BBFJ0(22)-(M) (204°C)* BBFJ0(22)-(M) (204°C)*


NPS ½ – 1½, Class 800, SW, BC, API trim 12 (316 SS), swing-type, integral HF seat NPS ¾ – 1½, Class 800, SW, BC, API trim 12 (316 SS), piston-type, integral HF seat

ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L

YCAK5 YCNK5

25, 27, 58


NPS 3– 10, Class 300, RF, retainerless dual plates, through-drilled solid lugs, integral metal seat, Inconel springs, 316 SS plates and pins NPS 12 – 24, Class 300, RF, retainerless dual plates, double-flanged, integral metal seat, Inconel springs, 316 SS plates and pins

ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M

BCYJ0 BCYJ0

23, 24, 25, 58


NPS 2 – 24, Class 300, RF, BC, swing-type (piggable), 316 SS trim, HF seat


BCFJ0 8, 25, 26, 58

Check Valves ASME B16.34

NPS 2, Class 300, RF, BC, swing-type (non-piggable), API trim 12 (316 SS), integral HF seat


BCAJ0

25, 26, 29, 58


NPS ¾ – 1½, Class 800, SW, BB, OS&Y, T-Body, API trim 12 (316 SS), graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 182/A 182M F316L ASTM A 182/A 182M F316

YTAK5 BTAJ0

33, 58



of 43 Rev 0




†

Globe Valves ASME B16.34

NPS 2 – 8, Class 300, RF, BB, OS&Y, T-Body, API trim 12 (316 SS), graphitic packing


BTAJ0 3, 28, 29, 33, 58


NPS 10, Class 300, RF, through-drilled lugs, 316 SS disc, 316 SS seal ring, 316 SS body, graphitic packing NPS 12-24, Class 300, RF, double-flanged, 316 SS disc, 316 SS seal ring, 316 SS body, graphitic packing


BFAJ0 BFAJ0

2, 3, 7, 8, 11, 28, 33, 58


NPS ¾ – 1½, Class 800, SW, BB, OS&Y, solid wedge, API trim 12 (316 SS), standard port, graphitic packing NPS ¾ -1, Class 800, SW x SE, BB, OS&Y, solid wedge, API trim 12 (316 SS), standard port, graphitic packing, integral flange NPS 1 – 2, Class 300, RF, integral flgs, ditto

ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L ASTM A 182/A 182M F316

YGAK5 YGAK7 BGAJ0

3, 22, 28, 33, 58

Gate Valves ASME B16.34

NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 12 (316 SS), standard port, graphitic packing NPS 6-24, Class 300, RF, BB, OS&Y, flexible wedge with cavity relief, integral flange, API trim 12 (316 SS), standard port, graphitic packing


BGAJ0 BGAJ0

3, 8, 22, 28, 29, 33, 58



4


NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, 316 SS body, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, 316 SS body, fire-safe design NPS 2, Class 300, RF, single body with

ASTM A 182/A 182M F316 ASTM A 182/A 182M F316 ASTM A 182/A

BSAJ10 BSAJ10(04) BSAJ0(M)

2, 3, 4, 30



of 43 Rev 0




†

two obturators and a bleed, standard bore, DN 50 body, SS316 body, Metal Seats, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, SS316 body, metal seats, fire-safe design

NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, SS316 body, metal seats, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, SS body, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, SS body, metal seats, fire-safe design

182M F316 ASTM A 182/A 182M F316 ASTM A 182/A 182M F316 ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L

BSAJ10(04)-(M) BSAJ10(M) BSAK10(06) BSAK10(06)-(M)




of 43 Rev 0





ASTM A 320/A 320M Gr. L7 ASTM A194/A194M Gr. 4L

80

Flanges ASME B16.5

NPS 1 – 1½, Class 300, RF, SW NPS 2 – 24, Class 300, RF, WN, bore to match pipe

ASTM A 182/A 182M F316L

89

Flanges ASME B16.47

NPS 26 – 30, Class 300, Series A, RF, WN, bore to match pipe

ASTM A 182/A 182M F316L

57



ASTM A 182/A 182M F316L

Gaskets ASME B16.20


60



ASTM A 182/A 182M F316L

54, 62

Fittings ASME B16.9

NPS 2–8, BW, SMLS, CL-S, same thickness as pipe NPS 10-36, BW, Welded CL-WX

ASTM A 403/A 403M WP316L

55, 56

Branch Outlet Fittings (O-lets) MSS SP-97

NPS ½ – 1½, branch outlet fitting, SW outlet, Class 3000 for Sch. 160 and lighter, Class 6000 for Sch. XXS NPS 2 – 6, branch outlet fitting, BW outlet to match branch wall NPS 4 – 6, Buttweld O-let (Light Wall) Fitting

ASTM A 182/A 182M F316L

53, 62

Pipe ASME B36.10M ASME B31.19M

NPS ½ –8, thickness (see below) NPS 10 – 30, EFW, Class 1

ASTM A 312/A 312M TP 316L (SMLS) ASTM A 358/A 358M 316L CL.1 (welded)

51, 52, 53, 54, 63, 66

Spectacle Blind / Paddle Spacer / Blank ASME B16.48

NPS 1-24, Class 300, RF ASTM A240 316 (Refer to Table 4, PG-PDS 03-01-01, for the type)




of 43 Rev 0


Corrosion Allowance (C.A.) (see Note 87 in the Appendix of PG-PDS 03-01-01)

A C.A. = 0 mm

NPS Sch.

½ – 2 40S

3 – 6 40S

8 – 10 20

12 – 30 30


Branch Table

30 BWT

24 BRT BWT

20 BRT BRT BWT

18 BRT BRT BRT BWT





8 RB RB RB RB RB RB BRT BRT BWT

6 WOL WOL WOL WOL WOL WOL WLL BRT BRT BWT

4 WOL WOL WOL WOL WOL WOL WLL WLL BRT BRT BWT


2 WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT

1½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL BRT SWT

1 SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SWT

¾ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SWT

B

R

A

N

C

H

S

I

Z

E

S

N

P

S

½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SRT SWT

30 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½


Legend:

BWT = Buttweld Tee SOL = Socket Weld O-let fitting RB = Reinforced Branch

WLL = Buttweld O-let Fitting(Light Wall)

SRT = Socket Weld Reducing Tee BRT = Buttweld Reducing Tee

WOL = Weld O-let Fitting



of 43 Rev 0

2.3 Class 300: Stainless Steel–Process Piping B11A(X)

Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet

Service HP Flare

Pipe Material 316L stainless steel

Corrosion Allowance 0mm

Valve Material 316L stainless steel (flanged), 316L stainless ( BW)

Valve Material 316 or 316L stainless steel for flanged valves

Valve Trim 316 stainless steel



PWHT No



−101 to 38 4136 −150 to +100 600

93 3516 200 510

149 3137 300 455

177 3013 350 437


(See Notes 6† & 33†)

Limits based upon 316L flange ratings, unless noted otherwise.


For blow-down scenario (short term condition), elastomer - Viton is suitable to -70°C.

204 2895 400 420




†


NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design

ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M

BBAJ0(01) (-50°C to 177°C)* BBFJ0(01) (-50°C to 177°C)* BBFJ0(22)-(M) (204°C)*

2, 3, 6, 7, 8, 9, 11, 20, 21, 28, 33, 58



of 43 Rev 0




†


NPS ¾ -1, Class 800, BW x SE, BB, OS&Y, solid wedge, API trim 12 (316 SS), standard port, graphitic packing, integral flange

ASTM A 182/A 182M F316L

YGAK10

3, 22, 28, 33, 58

Gate Valves ASME B16.34

NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 12 (316 SS), standard port, graphitic packing

ASTM A 182/A 182M F316

BGAJ0 3, 22, 28, 29, 33, 58






ASTM A 320/A 320M Gr. L7 ASTM A194/A194M Gr. 4L

80

Flanges ASME B16.5

NPS ¾– 1½, Class 300, RF, WN NPS 2 – 24, Class 300, RF, WN, bore to match pipe

ASTM A 182/A 182M F316L

89

Flanges ASME B16.47

NPS 26 – 30, Class 300, Series A, RF, WN, bore to match pipe

ASTM A 182/A 182M F316L

57



ASTM A 182/A 182M F316L

Gaskets ASME B16.20


60



ASTM A 182/A 182M F316L

54, 62

Fittings ASME B16.9

NPS 2–8, BW, SMLS, CL-S, same thickness as pipe NPS 10-36, BW, Welded CL-WX

ASTM A 403/A 403M WP316L

55, 56

Branch Outlet Fittings

NPS 1½– 6, sweepolet BW outlet fitting (B31.3), to match branch wall

ASTM A 182/A 182M F316L

See notes in branch table

Pipe ASME B36.10M ASME B31.19M

NPS ½ –8, thickness (see below)

ASTM A 312/A 312M TP 316L (SMLS)

51, 52, 53, 54, 63, 66



of 43 Rev 0



NPS 10 – 30, EFW, Class 1

ASTM A 358/A 358M 316L CL.1 (welded)

Spectacle Blind / Paddle Spacer / Blank ASME B16.48

NPS 1-24, Class 300, RF ASTM A240 316 (Refer to Table 4, PG-PDS 03-01-01, for the type)



Corrosion Allowance (C.A.) (see Note 87 in the Appendix of PG-PDS 03-01-01)

A C.A. = 0 mm

NPS Sch.

½ – 2 40S

3 – 6 40S

8 – 10 20

12 – 30 30

Note: For all size, use D/t ratio <100.



of 43 Rev 0


Branch Table

30 BWT

24 BRT BWT

20 BRT BRT BWT

18 BRT BRT BRT BWT

16 BRT BRT BRT BRT BWT

14 BRT BRT BRT BRT BRT BWT

12 BRT BRT BRT BRT BRT BRT BWT

10 BRT BRT BRT BRT BRT BRT BRT BWT

8 BRT+R

BRT+R

BRT BRT BRT BRT BRT BRT BWT

6 BRT+R

BRT+R

BRT+R

BRT+R

BRT BRT BRT BRT BRT BWT

4 BRT+R

BRT+R

BRT+R

BRT+R

BRT+R

BRT+R

BRT+R

BRT BRT BRT BWT

3 SWL SWL SWL SWL SWL SWL SWL SWL SWL BRT BRT BWT

2 SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

BRT BRT BWT

1½ SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

SWL+B

BRT+S

BRT BRT BWT

1 SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

BRT+S

BRT+S

BRT BRT BWT

B

R

A

N

C

H

S

I

Z

E

S

N

P

S

¾ SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

SWL+B+S

BRT+S

BRT+S

BRT BRT BRT BWT

30 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾


Note:

This table is applicable for High Pressure Let Down or Other High Velocity Piping w/AIV or FIV. Minimum size shall be NPS 4 for connection to the main header / sub-header w/AIV or FIV. Full encirclement pads shall be used for attachments of all bracing to the header. Bracing shall support in two planes using a minimum one brace in each plane orientated at no less than 45 and no more than 90 degrees part.

Legend:

BWT = Buttweld Tee SWL = Sweepolet Fitting(B31.3)

BRT = Buttweld Reducing Tee B = Braces

R = Reducer S = Swage (Buttweld Both End)



of 43 Rev 0

APPENDIX: NOTES TO PIPING LINE CLASS 300

The Notes for this PDS can be found in PG-PDS 03-01-01.

In Class 300 and higher (design pressures > 4137 kPa [600 psig]), elastomers shall also be resistant to explosive decompression as might be caused by high pressure gas, especially in the presence of carbon dioxide. See PG-PDS 29-01-37 for more info on elastomers and prevention of explosive decompression.



of 43 Rev 0

ATTACHMENT: PURPOSE CODE DEFINITIONS

Code Description

* Assigned to paragraphs that require the Owner's Engineer to provide additional information or make a decision.

A Assigned to paragraphs that require approval from the Owner's Engineer before the work may proceed or the design is finalized.

C Assigned to paragraphs whose primary purpose is reduced costs. Reduced cost in this context refers to initial investment cost and does not include life cycle cost considerations. Life cycle cost considerations are captured under reliability, maintainability, or operability purpose codes.

E Assigned to paragraphs whose primary purpose is driven by environmental considerations. Environmental considerations typically include specifications intended to protect against emissions/leakage to the air, water, and/or soil. Deviations from the specifications contained in such paragraphs require formal review and approval according to local environmental policy.

I Assigned to paragraphs that provide only clarifying information, such as Scope statements, definitions of terms, etc.

M Assigned to paragraphs whose primary purpose is to provide for maintainability of equipment or systems. Maintainability provisions are those that facilitate the performance of maintenance on equipment/systems either during downtimes or during onstream operations.

O Assigned to paragraphs whose primary purpose is to assure operability of equipment or systems. Operability is the ability of the equipment/system to perform satisfactorily even though conditions are off-design, such as during start-ups, process swings, subcomponent malfunction, etc.

R Assigned to paragraphs whose primary purpose is to improve or assure the reliability of equipment or systems. Reliability is a measure of the ability of equipment/systems to operate without malfunction or failure between planned maintenance interventions.

S Assigned to paragraphs containing specifications/guidance where the primary purpose is the avoidance of incidents impacting personnel safety, operational safety, and the public in general and/or involving responses to emergency situations. Any deviation from the specifications contained in such designated paragraphs requires formal review and approval according to local safety policy.

Personnel Safety: Refers to incident-related personnel injuries or illness, e.g., burns, cuts, abrasions, inhalation of or exposure to dangerous substances, etc., that could result in medical treatment, restricted work, lost-time incidents, or fatalities.

Operational Safety:

Refers to the prevention and control of process releases, fires, and/or explosions that could result in damage to equipment, process disruption, or personnel injury or illness.



of 43 Rev 0

RECORD OF CHANGE

Revision 0 Date: 21/03/11

Location Action Description

Initial Publish

pghu eh lspds 002004 rev 0

Documents