vipam 3000

8/13/2019 VIPAM 3000

1/24

Features

Rating & Performance

Operational Characteristic

Characteristic Curve

Operational Characteristic & Terminal Marks

Connecting Method

External Structure & Each Part Name

External Dimensions & Diagram

Control Circuit Diagram & Development

Test Report

D3-2

D3-4

D3-6

D3-10

D3-14

D3-16

D3-18

D3-20

D3-22

Digital Multifunction Integrated Protection RelayD3C O N T E N T S

VIPAM 3000

8/13/2019 VIPAM 3000

2/24

D3-2 VITZROTECH

Digital Multifunction Integrated Protection Relay _ Feature

VITZRO TECH VIPAM 3000-FI is a Compact Size Digital Integrated Protection Relay that provides a high-precision measurement and

protective relay on electric power receiving/distributing equipments. It is installed with a 32bit high-speed DSP that allows it to

perform the protective relay and measurement at the same time. VIPAM 3000-FI supports essential protective relay elements that

are used at extra HV panels and HV panels of general extra HV consumers. Its operation and setting are simplified compared to the

existing relay and the cost is reduced. VIPAM 3000-FI uses the RS-232 port in front to set equipments, measure and monitor power

and perform various additional services including saving, modifying and recovering the setting value[relay element]. It can also

download the fault waveform from PC to analyze. The RS-422/485 Port in rear part is connected to communicate with the upper

software and provides various application services such as measuring and monitoring power, controlling CB and so on.

VIPAM 3000

8/13/2019 VIPAM 3000

3/24

D3-3VIPAM 3000

Features

MainFunction

Dig

italMultifunction

Inte

gratedProtectionRelay

D3

Protection Relay\Function

Over-Current Relay Time Delay & InstantaneousElement, OCR(51P, 50P)

Ground Over-Current Relay Delay & InstantaneousElement, OCGR(51G, 50G)

Directional Ground Over-Current Relay Delay

& Instantaneous Element, DOCGR(67N)

Selective Ground Relay Definite Time Element, SGR(67G)

Over Voltage Relay Definite Time Element, OVR(59P)

Low Voltage Relay Definite Time Element, UVR(27P)Ground Over Voltage Relay Definite Time Element,

OVGR(64G)

Open-Phase Relay Definite Time Element, POR(47P)

Negative-Phase Over Voltage Relay Definite Time

Element, NSOVR(47)

Unlike the existing method that requires peripheral analogue or digital relay equipments, the body of

VIPAM 3000 is equipped with all the digital relay elements to minimize the time and spatial loss.

All the measurements and relay values are digitized to ensure the reliability and precision.

VIPAM3000 uses DSP to perform a highly reliable and precise measurement function and relay function.

Various relay elements are repeatedly computed in real-time to enable the precise measurement

and the reliable and high-speed relay operations.

Provide 9 types of various relay elements that are vital for electric power system (9 types)

OCR(51P/50P), OCGR(51G/50G), DOCGR(67N), SGR(67G), OVR(59P), UVR(27P), OVGR(64G), POR(47P),

NSOVR(47)

Power quality function, including harmonic (Voltage/Current of each phase), K-Factor and so on

Function to save fault waveform using ferroelectric RAM.

- Save 1sec data when a failure is generated (10 cycles before failure/50 cycles after failure)

- Maintain the recent failure data

Provide a function to analyze the fault waveform using PC monitoring program

Event, Fault Recording Function

KEMC1120 Certified

Measurement Function

32 Sampling/Cycle Measurement

Current(Phase, Ground, Zero-Phase)

Voltage(Phase, Line, Ground)

Current(Active, Reactive, Apparent)

Electric Energy(Active, Reactive, Apparent)

Reverse Electric Energy(Active, Reactive)Power-Factor(PF)/Frequency)

User-Convenient Function

Event Record

Fault Record

Fault Wave Record

Alarm DO Count RecordCB Count Record

Display Function

204 Mono Character LCD Applied

Display Various Operating Statesusing 24 LEDs

Confirm Menu to prevent error

operation of CB ON/OFF

Power Quality Function

Harmonic

(Voltage & Current of each phase)

K-Factor

Communication Function

Front RS-232 Port, 1EA (For PC HMI)

Rear RS-422/485 Port, 1EA

(For Modbus RTU)

8/13/2019 VIPAM 3000

4/24

Rating & Performance

D3-4 VITZROTECH

Item Specification

Connecting Method

Control Power

Power Consumption

Frequency

Rating

Burden

Rating

Burden

Type

Rating

Type

Rating

Operating Temperature Range

Storage Temperature Range

Operating Humidity Range

Altitude

Others

Applied Standard

1P2W, 1P3W, 3P3W, 3P4W

AC85V220V, DC100V300V

Normal: 30W or below, During Operation : 50W or below

60Hz(50HzOption)

PT: 110V or 110/3V

GPT: 190V or 190/3V

PT: 0.5VA or below

GPT: 0.5VA or below

PT: 2V350V[L-N]

GPT : 2V200V[L-N]

CT:5A

ZCT : 1.5mA

CT: 1.0VA or below

ZCT: 1.0VA or below

CT(Phase): 0.05A150A

CT(Ground): 0.02A60A

ZCT : 0.5mA9mA

CB ON/OFF State Input: 2EA

Digital Input : 14EA

Wet Contacts Input

AC/DC80125V(Ripple factor 30% or below)

For Interruption : 2EA

For Alarm:8-Channel, For L/R: 2-Channel, For Buzzer: 1-Channel

System For Fail : 1-Channel

Dry Contact Output

For Interruption : AC250V 16A/DC30V 16A Resister Load

Others : AC250V 5A /DC30V 5A Resister Load

-10 55

-25 70

Daily Average 90% or less (No dewdrops form)

Altitude of 1,000m or below

Place without abnormal vibrations & impulses

Place with less contaminated air

KEMC1120, IEC60255, IEC61000-4

Voltage

Current

Input Contact

Output Contact

Rating

Measurement Range(Multiplying Factornot applied)

Measurement Range(Multiplying Factor

not applied)

Number of Contacts: 16EA

Number of Contacts: 14EA

8/13/2019 VIPAM 3000

5/24

D3

D3-5VIPAM 3000

VIPAM 3000

ProtectionElement

Operation Type Operating Value SettingOperating Time Characteristic

Setting Range CharacteristicRemarks

Time Delay Element

Time Delay Element

Time Delay Element

Time Delay Element

Time Delay Element

disable, 1.0In~24.0In / 0.1In




disable, 1.0In~10.0In / 0.1Io

0.07Vo~1.0Vo / 0.01Vo

0 359 / 1 , 90

disable, 0.02In~2.0In / 0.01Io

0.07Vo~1.0Vo / 0.01Vo

0 359 / 1 , 90

disable, 0.6Iz~4.0Iz / 0.01Iz

0.07Vo~1.0Vo / 0.01Vo

0 359 / 1 , 90

disable, 0.8Vn~1.6Vn / 0.01Vn

disable, 0.2Vn~1.0Vn / 0.01Vn

disable, 0.05Vo~0.8Vo / 0.01Vo

disable, 5~100% / 1%

disable, 5~100% / 1%

In=5A

In=5A

Vo=110,190VIn=5A

Vo=110,190V

Vo=110,190V

Iz=1.5mA

Vn=110,63.5V

0.05~100s/0.01s50ms or below

0.05~10/0.01

0.1~100s/0.01s

0.05~100s/0.01s50ms or below

0.05~10/0.010.1~100s/0.01s

0.05~100s/0.01s50ms or below

0.05~10/0.010.1~100s/0.01s

0.1~100s/0.01s

0.1~100s/0.01s

0.1~100s/0.01s

0.1~100s/0.01s

0.1~100s/0.01s

0.1~100s/0.01s

OCR(50/51)

OCGR(50/51G)

DOCGR(67N)

Instan-taneousElement

TimeDelayElement

TimeDelayElement

SGR(67G)

OVR(59)

UVR(27)

OVGR(64G)

POR(47P)

NSOVR(47)

Type Display Range Precision

Phase Voltage

Phase-phase voltage

Current

Active

Reactive

Apparent

ActiveReactive

Apparent

Active

Reactive

Frequency

Power-Factor

Voltage

Current

Voltage

Current

Voltage

Current

0.0V~9999.99kV

0.0V~9999.99kV

0.0A~9999.99kA

0.0W~9999.99MW

0.0Var~9999.99MVar

0.0VA~9999.99MVA

0.0Wh~9999.99MWh0.0Varh~9999.99MVarh

0.0VAh~9999.99MVAh

0.0Wh~9999.99MWh

0.0Varh~9999.99MVarh

45Hz~65Hz

0.000~1.000Lead/Lag

Second Harmonic~15 Harmonic

Second Harmonic~15 Harmonic

0.0~100.0

0.0~100.0

0.0~100.0%

0.0~100.0%

0.5%

0.5%

0.5%

1.0%

1.0%

1.0%

1.0%1.0%

1.0%

1.0%

1.0%

0.03Hz

1.0%

0.5%

0.5%

-

-

1.0%

1.0%

Reverse ElectricEnergy

THD

K-Factor

Harmonic

ElectricEnergy

Power

PerformanceProtection Relay Element

Measurement Display Range

Dig

italMultifunction

Inte


InstantaneousElement



Zero Phase Current

Zero Phase Voltage

Standard Phase Angle

Zero Phase Current

Zero Phase Voltage


Zero Phase Current

Zero Phase Voltage


Time DelayElement

DefiniteTime

Inverse TimeDefinite Time



DefiniteTime

DefiniteTime

DefiniteTime

Definite Time

Definite Time

Definite Time

Definite Time

Definite Time

8/13/2019 VIPAM 3000

6/24

Item Area

Current

Rated Current(In)

Operating Value Setting Range

Operating Time Setting(Delay)

Recovery Level

Accuracy

Operating Characteristic

Accuracy of Operating Time

Fundamental wave of phase current(Remove harmonic & DC offset)

5A

0.20 In~10.00In/0.01In unit adjustment

0.10s~100.00s/0.01s unit adjustment

97% of operating value setting

5%

Definite(Definite Time)

Bigger value between 5% of setting value or 35ms

Item Area

Current

Rated Current(In)



Recovery Level

Accuracy

Operating Time



5A

1.0In~24.0In/0.1In unit adjustment



5%

Operate within 0.05s when the operating time is set as 0.05sOperate within the set value when the operating time is set as that value


Item Area

Current

Rated Current(In)


Operating Time Setting(Lever)

Recovery Level

Accuracy

Operating Characteristic Curve


Fundamental wave of ground current(Remove harmonic & DC offset)

5A

0.02In~2.00Io/0.01In unit adjustment

0.05~10.0/0.01 unit adjustment


5%

IEC(SI, VI, EI, LI), KEPCO(SI, VI)



D3-6 VITZROTECH

Over-CurrentRelay InverseTime Element

Over-CurrentRelay DefiniteTime Element

Over-CurrentRelayInstantaneousElement

GroundOver-CurrentRelay InverseTime Element

OCR(51P)

OCR(51P)

OCR(50P)

OCGR(51G)

Item Area

Current

Rated Current(In)



Recovery Level

Accuracy




5A




5%



8/13/2019 VIPAM 3000

7/24

D3

D3-7VIPAM 3000

VIPAM 3000

Current

Rated Current(Io)


Standard Voltage

Rated Voltage(Vo)

Standard Voltage Setting Range


Recovery Level

Standard Sensitivity Phase Angle

Accuracy of Phase Angle




5A


Fundamental wave of zero-phase voltage(Remove harmonic & DC offset)

110V, 190V

0.07Vo~1.00Vo/0.01Vo unit adjustment



0~359/1unit adjustment

3



Current

Rated Current(In)



Recovery Level

Accuracy




5A




5%

Operate within 0.05s when the operating time is set as 0.05s


Current

Rated Current(Io)



Recovery Level

Accuracy




5A




5%



GroundOver-CurrentRelay DefiniteTime Element

GroundOver-CurrentRelayInstantaneousElement

Directional

GroundOver-CurrentRelay InverseTime Element

DirectionalGroundOver-CurrentRelay DefiniteTime Element

OCGR(51G)

Item Area

Item Area

OCGR(50G)

DOCGR(67N)

Item Area

Current

Rated Current(Io)


Standard Voltage

Rated Voltage(Vo)



Recovery Level


Accuracy of Phase AngleOperating Characteristic



5A



110V, 190V





3Definite(Definite Time)


Item Area

DOCGR(67N)

Dig

italMultifunction

Inte


8/13/2019 VIPAM 3000

8/24

Current

Rated Current(Iz)


Standard Voltage

Rated Voltage(Vo)

Standard Voltage Setting RangeOperating Time Setting(Delay)

Recovery Level


Accuracy of Phase Angle



Current

Rated Current(Io)


Standard Voltage

Rated Voltage(Vo)



Recovery Level


Accuracy of Phase AngleInstantaneous Operation



1.5mA

0.60Iz~4.00Iz/0.01Iz unit adjustment


110V, 190V

0.07Vo~1.00Vo/0.01Vo unit adjustment0.10s~100.00s/0.01s unit adjustment



3




5A



110V, 190V





3Operate within 0.05s when the operating time is set as 0.05s



D3-8 VITZROTECH

Item Area

Item Area

DOCGR(67N)

SGR(67G)

DirectionalGroundOver-CurrentRelayInstantaneousElement

SelectiveGround RelayDefinite TimeElement

Over-VoltageRelay DefiniteTime Element

Voltage

Rated Voltage(Vn)



Recovery Level

Accuracy



Fundamental wave of phase voltage or phase-phase voltage(Remove harmonic & DC offset)

110V, 63.5V

0.80Vn~ 1.60Vn/ 0.01Vn unit adjustment



5%



OVR(59P)

Item Area

8/13/2019 VIPAM 3000

9/24

Dig

italMultifunction

Inte


D3

D3-9VIPAM 3000

VIPAM 3000

Voltage

Rated Voltage(Vo)



Recovery Level

Accuracy



Voltage

Setting Characteristic



Recovery Level

Accuracy




3-Phase Voltage Unbalance Factor[%] = ((Vmax-Vmin) /Vaverage)100

5~100%/1% unit adjustment



5%

Definite


Voltage

Rated Voltage(Vn)



Recovery Level

Accuracy




110V, 190V




5%

Definite


Item Area

Item Area

Item Area

Low-VoltageRelay DefiniteTime Element

GroundOver-VoltageRelay DefiniteTime Element

Open-PhaseRelay DefiniteTime Element

UVR(27P)

OVGR(64G)

POR(47P)


110V, 63.5V

0.20Vn~1.00Vn/ 0.01Vn unit adjustment



5%

Definite

From 1.05times the operating value setting, Bigger value between5% of setting value or 35ms

Voltage



Recovery Level

Accuracy



Fundamental wave of negative-phase calculated using the 3-phase voltage

5~100%/1% unit adjustment



5%

Definite


Negative-PhaseOver VoltageDefinite TimeElement

NSOVR(47)

Item Area

8/13/2019 VIPAM 3000

10/24


D3-10 VITZROTECH

Here, t : Operating Time

M : Multiplier Setpoint(Time Tab Range:0.05-10.00

(Adjustment of 0.01unit))

I : Input Current

Ipu : Setting Value

K = 0.11

= 0.02

C = 0.42


M : Multiplier Setpoint

(Time Tab Range:0.05-10.00


I : Input Current

Ipu : Setting Value

K = 39.85

= 1.95

C = 1.084

KEPCOStandardInverse

KEPCO VeryInverse

8/13/2019 VIPAM 3000

11/24

Dig

italMultifunction

Inte


D3

D3-11VIPAM 3000

VIPAM 3000





I : Input Current

Ipu : Setting Value

K = 0.14

= 0.02

C = 0

Here, t : Operating TimeM : Multiplier Setpoint



I : Input Current

Ipu : Setting Value

K = 13.5

= 1.00

C = 0

IECInverse TimeStandardInverse

IEC VeryInverse

8/13/2019 VIPAM 3000

12/24


D3-12 VITZROTECH


M : Multiplier Setpoint(Time Tab Range:0.05-10.00


I : Input Current

Ipu : Setting Value

K = 80

= 2.00

C = 0





I : Input Current

Ipu : Setting Value

K = 120

= 1.00

C = 0

IEC ExtremelyInverse

IEC LongInverse

8/13/2019 VIPAM 3000

13/24

Dig

italMultifunction

Inte


D3

D3-13VIPAM 3000

VIPAM 3000

It is operated when it meets thefollowing conditions at the same time.

Condition 1) |Vo| Voset

Condition 2) |Io| Io set

Condition 3) The phase difference ofzero-phase current withzero-phase voltage is within

the shaded area in the picture.

SGR PhaseCharacteristics

8/13/2019 VIPAM 3000

14/24

Item Specification Relevant Standard

Insulated Resistance

Power Frequency Withstand Voltage

Lightning Impulse Withstand Voltage

Oscillatory Surge

Surge Susceptibility

Fast Transient Burst

Electrostatic Discharge(ESD)Radio FrequencyRadiated Susceptibility

Radio FrequencyConducted Susceptibility

500V, 10Mor above

AC 2000V, 1min

5kV(3kV)

2.5kV ~ 3kV

Control Power, Transformer:2kV / Signal:1kV

Control Power, Transformer:4kV / Signal:4kV

Air:8kV / Contact: 6kV

10V/m

10V

KEMC 1120

IEC 60255-5

IEC 60255-5

IEC 60255-22-1

IEC 60255-22-5

IEC 60255-22-4

IEC 60255-22-2

IEC 60255-22-3

IEC 60255-22-6

LED Type Color Display Condition & State

POWER

RUN

SYS FAIL

TX

RX

6types other thanOCR, OCGR

R

ST

N

TIME

INST

TRIP

Local

Remote

CB ON

CB OFF

Green

Yellow

Red

Yellow

Yellow

Red

Red

RedRed

Red

Red

Red

Red

Red

Green

Red

Green

Lighted when control power is supplied

Flickering when the system is normally operating

Lighted when the result of system self-diagnosis is Fail

Display of transmitted state during RS422 /485 communication

Display of received state during RS422 /485 communication

Lighted when it is in Alarm or Trip state due to a failure whileLED flashes at Pickup State after the relay element is set asan operating state

Turned on during the Phase(R) Trip; flickering at Pickup status

Turned on during the Phase(S) Trip; flickering at Pickup statusTurned on during the Phase(T) Trip; flickering at Pickup status

Turned on during the Phase(N) Trip; flickering at Pickup status

Lighted when time delay failure is generated

Lighted when instantaneous failure is generated

Lighted when Trip (Failure) is generated

Lighted when CB control condition is Local

Lighted when CB control condition is Remote

Lighted when CB state is ON(Close)

Lighted when CB state is OFF(Open)

Communication

RelayOperationDisplay

Operating Characteristic & Terminal Marks

D3-14 VITZROTECH

OperatingCharacteristic

Input/Output Channel

C/B State & Run Display

Noise Rating

Type Item Form Rating

Dry contacta,bContacts

Input

Output

AC/DC110,125[V]Source Applied Voltage & Current

AC/DC110, 125V, 5mA

(R/Y Auxiliary Contact Capacity)

Resistance Load : AC 250V,16A DC30V16A COS=1.0

Resistance Load : AC 250V,5A DC30V5A COS=1.0

DI1(CB-ON)

DI2(CB-OFF)DI3DI16

CB-ON(DO 01)CB-OFF(DO 02)

DO03DO14(For L/R, For Buzzer,For System Fail)

8/13/2019 VIPAM 3000

15/24

Dig

italMultifunction

Inte


D3

D3-15VIPAM 3000

VIPAM 3000

Terminal Block

Terminal Marks

8/13/2019 VIPAM 3000

16/24

D3-16 VITZROTECH

Connecting Method

3P4WConnection3CT /3PT


8/13/2019 VIPAM 3000

17/24

Dig

italMultifunction

Inte


D3

D3-17VIPAM 3000

VIPAM 3000

3P3WConnection3CT /GPT


8/13/2019 VIPAM 3000

18/24

External Structure & Each Part Name

D3-18 VITZROTECH

ExternalStructure

1 Power LED(Green)

2 RUN LED(Yellow)

3 System Fail LED(Red)

4 Communication LED(Yellow)

5 Relay Operation Display LED(Red)

6 CB ON/OFF State Display LED(Red/Green)

7 Local/Remote State Display LED(Red/Green)

8 Function Key

9 Fault Reset Key

10 ESC Key

11 Local/Remote Selection Key

12 CB ON Key

13 CB OFF Key

14 Left Key

15 Right Key

16 Up Key

17 Down Key

18 Enter Key

19 LCD Display

20 RS-232 Port

8/13/2019 VIPAM 3000

19/24

Dig

italMultifunction

Inte


D3

D3-19VIPAM 3000

VIPAM 3000

Block Diagram

PC HMI Program

8/13/2019 VIPAM 3000

20/24

External Dimensions & Diagram

D3-20 VITZROTECH

Fault Wave

ExternalDimensions

8/13/2019 VIPAM 3000

21/24

Dig

italMultifunction

Inte


D3

D3-21VIPAM 3000

VIPAM 3000

MMI Block Diagram

8/13/2019 VIPAM 3000

22/24

Control Circuit Diagram & Development Test Report

D3-22 VITZROTECH

VIPAM3000-FISequenceDrawing(ExampleDrawing)

8/13/2019 VIPAM 3000

23/24

Dig

italMultifunction

Inte


D3

D3-23VIPAM 3000

VIPAM 3000

8/13/2019 VIPAM 3000

24/24

Development Test Report

vipam 3000

Documents