20. wan overview

Upload: viet-thang-nguyen

Post on 04-Apr-2018

222 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/30/2019 20. WAN Overview

    1/19

    ICND1 v1.0-5-1

    WAN Connections

    UnderstandingWAN Technologies

  • 7/30/2019 20. WAN Overview

    2/19

    ICND1 v1.05-2

    Wide-Area Network

  • 7/30/2019 20. WAN Overview

    3/19

    ICND1 v1.05-3

    Need for WANs

  • 7/30/2019 20. WAN Overview

    4/19

    ICND1 v1.05-4

    WANs vs. LANs

  • 7/30/2019 20. WAN Overview

    5/19

    ICND1 v1.05-5

    WAN Access and the OSI Reference

    Model

  • 7/30/2019 20. WAN Overview

    6/19ICND1 v1.05-6

    WAN Devices

    Routers

    Terminal servers

    Modems

    DSU/CSUWAN networking devices

    oATM switches

    oFrame Relay switches

    oPSTN

  • 7/30/2019 20. WAN Overview

    7/19ICND1 v1.05-7

    Physical Layer: WANs

  • 7/30/2019 20. WAN Overview

    8/19ICND1 v1.05-8

    Serial Point-to-Point Connections

  • 7/30/2019 20. WAN Overview

    9/19ICND1 v1.05-9

    WANMultiple LANs

  • 7/30/2019 20. WAN Overview

    10/19ICND1 v1.05-10

    WAN Data-Link Protocols

    HDLC

    PPP

    Frame Relay (LAPF)

    ATM

  • 7/30/2019 20. WAN Overview

    11/19ICND1 v1.05-11

    WAN Link Options

  • 7/30/2019 20. WAN Overview

    12/19ICND1 v1.05-12

    Circuit Switching

  • 7/30/2019 20. WAN Overview

    13/19ICND1 v1.05-13

    Public Switched Telephone Network

  • 7/30/2019 20. WAN Overview

    14/19ICND1 v1.05-14

    PSTN Considerations

    Advantages

    Simplicity

    Availability

    Cost

    Disadvantages

    Low data rates

    Relatively long connection setup time

  • 7/30/2019 20. WAN Overview

    15/19

    ICND1 v1.05-15

    Leased Line

  • 7/30/2019 20. WAN Overview

    16/19

    ICND1 v1.05-16

    WAN Connection Bandwidth

  • 7/30/2019 20. WAN Overview

    17/19

    ICND1 v1.05-17

    Configuring a Serial Interface

    Enter global

    configuration mode.

    RouterX(config-if)#clock rate 64000

    RouterX(config-if)#

    RouterX(config)#interface serial 0/0/0

    RouterX(config-if)#

    RouterX#configure terminal

    RouterX(config)#

    RouterX(config-if)#bandwidth 64

    RouterX(config-if)#exit

    RouterX(config)#exit

    RouterX#

    Specify interface.

    Set clock rate

    (on DCE interfaces only).

    Set bandwidth

    (recommended).

  • 7/30/2019 20. WAN Overview

    18/19

    ICND1 v1.05-18

    Serial Interface show controller

    Command

    Shows the serial cable type

  • 7/30/2019 20. WAN Overview

    19/19

    ICND1 v1.05-19