M/S PRAKASH PAVER BLOCK & BRICKSwww.prakashpaverblocks.com

MASTERS OF CONSISTENCY & QUALITY

अब घर बनेगा सस्ता सनु्दर और मजबूत

OFFICE ADDRESS-BHAWANIPUR SITE CHANDANKYARI ROAD CHAS BOKARO JHARKHAND -827013MOB-8789062472/7739365808 EMAIL-prakashpaverblocks19@gmail.com

मजबुतीका वादा

CEMENT BRICKSPAVER BLOCKSCHEQUERED TILESROOF TILESGRASS PAVER BLOCKS COMPOUND WALL (BOUNDRY)

MANUFACTURED OF

GSTIN-20BXMPP2897Q1ZK

Pavers

M/S PRAKASH PAVER BLOCK & BRICKSMASTERS OF CONSISTENCY & QUALITY

Welcome toM/S PRAKASH PAVER BLOCK & BRICKS

Nature of BusinessManufacturerTotal Number of Employees

10 to 15 PeopleYear of Establishment2019Legal Status of FirmproprietorshipGST No.20BXMPP2897Q1ZK

We, ‘M/S PRAKASH PAVER BLOCK AND BRICKS ' established in 2019 is one of the leading manufacturing, supplier and service provider for our wide range of products. We have created a strong hold in the market for its varied range of products. Our range of products include Interlocking Paver Block,Chequered Tiles, Cement Bricks,Compound wall etc. Our skillfulengineers and technicians professionals monitor the production process so that our series not only save energy but are also cost-effective.

Our product supply all over india specially Jharkhand and Bihar.We provide best Quality and Best services.

Cement concrete tiles and paving blocks are precast solid products made out of cement concrete. The product is made in various sizes and shapes viz. rectangular, square and round blocks of different dimensions with designs for interlocking of adjacent tiles blocks. The raw materials required for manufacture of the product are portland cement and aggregates which are available locally in every part of the country

INTRODUCTION

MARKET POTENTIAL

Cement concrete tiles and paving blocks find applications in pavements, footpaths, gardens, passenger waiting sheds, bus-stops, industry and other public places. The product is commonly used in urban areas for the above

applications. Hence, the unit may be set up in urban and semi-urban areas, near the market. A lot of face-lift is being given to roads, footpaths along the roadside. Concrete paving blocks are ideal materials on the footpaths for easy laying, better look and finish. Whereas the tiles find extensive use outside the large building and houses, lots of these materials are also used in flooring in the open areas of public offices and commercial buildings and residential apartments

Cement concrete is a mixture of portland cement, aggregates (sand and stone chips) and water. Aggregates passing through 4.7 mm IS sieve are known as fine aggregates and the aggregates retained on this sieve are coarse aggregates. The process of manufacture of cement concrete paving blocks involves the following steps: a) Proportioning b) Mixing c) Compacting d) Curing e) Drying A concrete mix of 1:2:4 (cement: sand: stone chips) by volume may be used for cement concrete paving blocks with water to cement ratio of 0.62. The concrete mix should not be richer than 1:6 by volume of cement to combined aggregates before mixing. Fineness modules of combined aggregates should be in the range of 3.6 to 4.0. All the raw materials are placed in a concrete mixer and the mixer is rotated for 15 minutes. The prepared mix is discharged from the mixer and consumed in the next 30 minutes. Vibrating table may be used for compacting the concrete mix in the moulds of desired sizes and shapes. After compacting the blocks are demoulded and kept for 24 hours in a shelter away from direct sun and winds. The blocks thus hardened are cured with water to permit complete moisturisation for 14 to 21 days.

.Water in the curing tanks is changed every 3 to 4 days. After curing, the blocks are dried in natural atmosphere and sent for use. The concrete paving blocks gain good strength during the first 3 days of curing and maximum gains in strengths are secured in the first 10 to 15 days of curing. After curing, blocks are allowed to dry in shade so that the initial shrinkage of the blocks is completed before they are used in the work. A drying period of 7 to 15 days would normally complete the drying shrinkage after which they can be used. The concrete tiles are similarly produced with the help of semi-dry pressing of the mixture and allowed to set for 24-36 hours. It is cured in the tanks for 15 days. If need be water can also be sprinkled to gain maximum physical strength in 15-21 days.

PROCESS OF MANUFACTURING

Salient Features

Speedier & Easier Construction results in earlier completion and commissioning simultaneously cutting down cost over runs involved with delays. Gives a Stronger. Superior Structure with excellent Accousticproperties Lower Thermal Conduction saving Air Conditioning costs. High Fire Resistance, Attracting Lower insurance Premiums & Greater Safety. High Sulphate and salt attack resistance. Considerable saving in concrete due to lowering of loads and smaller RCC members saving in Plaster & Maintenance. Easy Concealed fittings & Mortar Saving & Aesthetics due to true sizes and perfect edges and confirming to Indian & International Codes.

Product Features Easy and speedy Installation

Large areas can be completed in very short time.

No curing, No waiting

As paver fixing requires no mortar or cementing material. The pavement can be opended to traffic immediately after installation.

Easy maintenance

Pavers can be extracted from the damaged area's & refitted again with minimum breakage, labour and in minimum time & cost. There is no patch work & potholes, cracks as in case of RCC & Bitumen paving.

Underground repairs & maintenance easy

Laying of Pipeline / Conduit / Cables / Trenches etc. is easy as pavers can be removed & refitted in minimum cost & time.

1

Product Features

2Excellent Drainage

Pavement made by pavers have crevice which put the water back into the ground. The sand bed underneath provides excellent drainage & eliminates water logging therefore water does not accumulate on interlocking paver pavements.

Reusability

Pavers can be reused imparting in flexibility for planning and re-planning. Large areas can be shifted at a later date it required with very little breakage.

Stops fire / Spills from spreading

The crevices in the pavement curtails fires and spills to where ever they start due to spillage getting soaked into the crevices and high fire rating of concrete interlocking blocks.

Product Features 3High strength and durability

Pavers have a Compressive strength of 250 Kgs/Sq.Cm and above therefore they are extremely durable and long lasting.

Excellent aesthetics

Pavers are available in different colours, thus different areas can be highlighted like parking ways, traffic lanes etc. which add to the overall aesthetics of your environment.

Excellent skid resistance

The slight rough texture (semi smooth) and tapered edges of the pavers gives good skid resisting properties to the pavement, making it safe even during monsoons for drive ways/path ways and other traffic areas.

QUALITY

We PRAKASH BRICK AND TILES manufacture high quality concrete interlocking paver's blocks of various colors, shapes and sizes. All of our cement concrete pavers are made with Portland cement, variable natural aggregates, pigments of the highest quality and admixtures, used to increase strength and density of our pavers as well as control efflorescence. Our Comapny is committed to building an Organization with customer as primary focus of the company. The company shall lay emphasis on the process of continual improvement in all areas of operations by adhering to quality management system and continual up-gradations of technology.

• Pre-Cast Compound Wall is Stronger, more durable, lean, time saving and economical than traditional compound wall.

RCC READYMADE BOUNDRY WALL

POLE DIMENSIONS: 150 mmx150mm, Length 4 feet to 12 feet groove width 60mm and depth 40mm.POLE REINFORCEMENT: 4mm dia.high tensile

carbonized steel wire 7 nos.. PANEL DIMENSIONS: 1 foot wide, 50 mm (2 inch thick) 6 feet length PANEL WEIGHT: 6'.0".X1'.0" Size 72 kg.( APPROX) PANEL REINFORCEMENT: 3mm dia. high tensile carbonized steel wire 4 nos.POLE WEIGHT : 14 kg/Rft (APPROX)GRADE OF CONCRETE: M-25 Design max.

TECHNICAL DETAILS

PRODUCT ADVANTAGES: Less space utilized i.e.,space saving. Speedy installation.Durability.

Re-Installable.Economy compared to conventional

products. Plastering not required.No Foundation Required

M/S PRAKASH PAVER BLOCK & BRICKSMASTERS OF CONSISTENCY & QUALITY

MANUFACTURES OF PAVER BLOCK,COMPOUND WALL,CHEQUERED TILES AND CEMENT BRICKS

GR

EEN

ING

TH

E B

RIC

K S

ECTO

R IN

JH

AR

KH

AN

D

अब घर बनेगा सस्ता सनु्दर और मजबूतBHAWANIPUR SITE CHANDANKYARI ROAD CHAS BOKARO JHARKHAND -827013

MOB-7739365808/8789062472 EMAIL-prakashpaverblocks19@gmail.com

www.prakashpaverblocks.com

VISITS:www.prakashpaverblocks.com

ORDER NOW

BANK DETAILS:PRAKASH PAVER BLOCK & BRICKSINDIAN BANKACCOUNT NO-6840767900IFSC CODE-IDIB000C184BRANCH-CHAS

FOLLOWS:

OFFICE ADDRESS-BHAWANIPUR SITE CHANDANKYARI ROAD CHAS BOKARO JHARKHAND -827013MOB-8789062472/7739365808 EMAIL-prakashpaverblocks19@gmail.com