wenglor lasik sensor

2
Error Output  Analog Outpu t RS-232 Interface    P   a   r    t    N   u   m    b   e   r Accessories 03 = Error Indicator 07 = Selector Switch 12 = Analog Output Indicator 24 = Plus Button 25 = Minus Button 63 = Analog Output Current Indicator Mounting Bracket WP Serial Interface Adapter S232W2 P 7 07 25 24 63 12 03 Ctrl.Panel 0 0.0 5.0 10   a    U    /    V c Connection Diagram No. Control Panel No. Suitable Plug No. Optical Data Working Range 40...160 mm Measuring Range 120 mm Resolution < 20 µm Resolution (Speed-Mode) < 30 µm Linearity 0.1 % Linearity (Speed-Mode) 0.2 % Light Source Laser (red) Wave Length 660 nm Service Life (T = +25°C) 100000 h Laser Protection Class (EN 60825-1) 2 max. Ambient Light 10000 Lux Electrical Data 18...30 V DC Supply Voltage < 80 mA Current Consumption (Ub = 24V) 750 Hz Cut-Off Frequency 300 Hz Cut-Off Frequency ( Resolution-Mode) < 660 µs Response Time < 1660 µs Response Time (Resolution Mode) < 10 µm/°C Temperature Drift -25...50 °C Temperature Range 0...10 V  Analog Outpu t < 1 mA Current Load Voltage Output 4...20 mA  Analog Outpu t < 500 Ohm Current Output Load Resistance RS-232 Interface 38400 Bd Baud Rate Mechanical Data Teach-In  Adjustment Plastic Housing IP 67 Protection Mode M 12x1 Connection 50 V Protective Insulation, Rated Voltage Plug  Version Reflex Sensors  for Measuring Tas ks TransmitterDiode 1 = Receiver Diode 2 = High resolution 20µm (Resolution-Mode) Linearity 0,1% (Resolution-Mode) Response Time <660µs (Speed-Mode) Zoom function 50 V sensors for your success www.wenglor.com sensors for your success www.wenglor.com Part Number CP24MHT80 Working Distance 40 mm 160 mm 0.5 x 1. 2 mm 1 x 2.5 mm Light Spot Size Table 1 a = Analog Voltage Output c = Measuring Range Replaces catalog device CP24MHT80    C    P    2    4    M    H    T    8    0 508 P 7 Technical Data Legend Wire colors according to DIN IEC 757 Test input Trigger input Analog output (1,2,3,...) Ground for the analog output Block discharge Valve output Valve control output "+" Valve control output "0V" Synchronization Receiver-Line Emitter-Line Grounding black brown red orange yellow green blue violet grey white pink green yellow Power supply "+" Power supply "0V" Power supply (AC Voltage) Switching output (1,2,3...) / NO Switching output (1,2,3...) / NC Contamination / Error output (NO) Contamination / Error output (NC) Input (analog or digital) Teach input Time delay (activation) Shielding RS-232 receive path RS-232 send path 508 Specifications are subject to change without notice The sensor uses a high-resolution CMOS line array and DSP technology, virtually eliminating material, colour and brightness related measuremen t value differences. The Measurement range is calibrated accurate to 10µm. Integrated analogue output can be configured for voltage 0…10 V (10...0 V) or current 4…20 mA (20...4 mA). 38/04 LASER  All dimensions in mm (1 mm = 0.03937 Inch) Output Graph

Upload: ankush-sharma

Post on 17-Oct-2015

11 views

Category:

Documents


0 download

TRANSCRIPT

  • Error Output

    Analog Output

    RS-232 Interface

    Par

    t Num

    ber

    Accessories

    03 = Error Indicator07 = Selector Switch12 = Analog Output Indicator24 = Plus Button25 = Minus Button63 = Analog Output Current Indicator

    Mounting Bracket WP

    Serial Interface Adapter S232W2

    P 7

    07

    25

    24

    63 12 03

    Ctrl.Panel

    00.0

    5.0

    10

    a U

    /V

    c

    Connection Diagram No.

    Control Panel No.

    Suitable Plug No.

    Optical Data

    Working Range 40...160 mm

    Measuring Range 120 mm

    Resolution < 20 m

    Resolution (Speed-Mode) < 30 m

    Linearity 0.1 %

    Linearity (Speed-Mode) 0.2 %

    Light Source Laser (red)

    Wave Length 660 nm

    Service Life (T = +25C) 100000 h

    Laser Protection Class (EN 60825-1) 2

    max. Ambient Light 10000 Lux

    Electrical Data

    18...30 V DCSupply Voltage

    < 80 mACurrent Consumption (Ub = 24V)

    750 HzCut-Off Frequency

    300 HzCut-Off Frequency (Resolution-Mode)

    < 660 sResponse Time

    < 1660 sResponse Time (Resolution Mode)

    < 10 m/CTemperature Drift

    -25...50 CTemperature Range

    0...10 VAnalog Output

    < 1 mACurrent Load Voltage Output

    4...20 mAAnalog Output

    < 500 OhmCurrent Output Load Resistance

    RS-232Interface

    38400 BdBaud Rate

    Mechanical Data

    Teach-InAdjustment

    PlasticHousing

    IP 67Protection Mode

    M 12x1Connection

    50 VProtective Insulation, Rated Voltage

    PlugVersion

    Reflex Sensors

    for Measuring Tasks

    Transmitter Diode1 =

    Receiver Diode2 =

    High resolution 20m (Resolution-Mode)

    Linearity 0,1% (Resolution-Mode)

    Response Time