wi-fi router huawei e5830 eng

8/10/2019 Wi-Fi Router Huawei E5830 Eng

1/28

1

Wi-Fi Router Huawei E5

User Guide


2/28

2

Content

Modem Description

Specification

SW installation guide User manual

Troubleshooting

Terms


3/28

3

Modem Description

Huawei E5830 HSDPA Wifi-router and a USB modem combined in one

device (hereinafter 5) that supports 3G and allows users to access

the Internet and send/receive short text messages direct from their PC

or multimedia devices connected to the 5 through WiFi.

The modem is connected to the USB port on the computer or through a

WiFi connection. The MicroSD slot allows using the modem both as

external storage and file depot.


4/28

4

Modem Description

The E5 support the following standards:

High-Speed Downlink Packet Access (HSDPA)

High-Speed Uplink Packet Access (HSUPA)

UniversalMobile TelecommunicationsSystem (UMTS)

Enhanced Data Rates for GSM Evolution (EDGE) General Packet Radio Service (GPRS)

Global System for Mobile communications (GSM)

The E5 supports:

HSDPA/UMTS data service EDGE/GPRS data service

WCDMA/GSM short message service


5/28

5

The E5 supports Plug and play (PnP), i.e. there is not need to havesetup disks as the device is installed automatically.

USB (2.0) standard connector

Supports up to 32GB memory. Insert a memory card to use the

modem as an external storage. Wi-Fi 802.11.b/g, encoding type WEP, WPA, WPA2

OS supported Windows 2000/ Windows XP/ Windows Vista/Windows7/ Mac OS X 10.4 and higher

Modem Description


6/28

6

Content

Modem Description

Specification


Troubleshooting

Terms


7/28

7

Standard WCDMA/HSDPA

R5GSM/GPRS/EDGE

R99

Data rate HSUPA 5.76Mbps;

HSDPA 7.2Mbps

EDGE236.8

Kbps

Indication OLED display

Dimensions

(L W H)

95 mm 48 mm 13

mm

Weight


8/28

8

Kcell Connect features

SMS

Sending / receiving short text messages.

Sending long messages.

Copying SMS from SIM card and vice versa .

Visual notification of new and unread messages.

Sending / receiving short text messages.

SD card

Editing SD card content.

Direct connection as external storage.

Access to files on the SD card through Wi-Fi

USSD Sending / receiving USSD commands

Specification


9/28

9

Data transmission

Enabling / disabling data transmission

(Internet).

Creating, editing, removing users connection

settings (APN). Data transmission is enabled

automatically. Automatic data transmission is enabled by

default.

SW installationAutomatic SW installation when connected to PC

(Plug and Play)

Other

Network settings:

Automatic registration mode

Manual registration mode

Status: network signal strength, operator, mode.

Specification

Kcell Connect features


10/28

10

Status indicator

1 Signal indicator

2 Network type2G

Network type3G

3 Wi-Fi indicator

Number of connections

4 Connection status

5 New SMS

Number of new SMS

6 Battery indicator

7 Roaming indicator

8 Automatic mode Manual mode


11/28

11

Content

Modem Description

Specification


Troubleshooting

Terms


12/28

12

Procedure for installing the management program depends on theoperating system (OS) installed on your PC. The following section

takes Windows XP as an example.

SW installation guide

1. Power on the E5.

2. Connect the E5 and PC with the compatible

data cable.3. The OS automatically detects and

recognizes new hardware and starts the

installation

wizard.

Note: If the auto-run program does not respond, find the installation

file in the driver path.

Then double-click the installation file to run the program. Follow the

onscreen instructions of the installation wizard.


13/28

13

After the program is installed, the shortcut icon of the program is

displayed on the desktop. Once the device is installed, the program

starts automatically. Every time the E5 is connected to the PC with a

compatible data cable, the program is launched automatically.

Note: You can also double-click the shortcut icon on the desktop to

launch the program.



14/28

14

Access the Web Management Page

Access the Web Management Page

Make sure that the connection between

the E5 and the Wi-Fi device or computer is proper..

Start the Internet browser and enter

http://192.168.1.1 or http://e5.home/index.aspin the address bar..

Enter the password, and then click Login.

Admin: This user is authorized to view and change configurations.

The default password is admin.Note: If the page is unavailable while the E5 is being connected with

PC through the compatible data cable, launch the management

program and then access the web page.

.


15/28

How to remove the E5

To remove the E5 use the Remove Windows Software feature. Double-click the task bar . The Safely Remove Hardware tip will

appear o the screen.

Select Eject CD Drive (E:) Web Partner to disconnect it. Follow the tips to disconnect the E5.

How to remove the Web Partner program.

Click on Start. Select Control Panel.

Click Add/Remove a Program to remove Web Partner.

15



16/28

16

Modem Description

Specification


Troubleshooting

Terms

Content


17/28

17

User manual

SMSTo manage SMS, open the SMS tab in Kcell Connect interface.Supported features: Receiving SMS Creating SMS Deleting SMS

Shared access to filesSupports shared access to files stored on the MicroSD through a Wi-Ficonnection.

USSD

To send a USSD command, open the USSD tab in Kcell Connectinterface. Supported features: Sending USSD commands Switching between USSD commands


18/28

18

User manual

Everyday Use

Charging the Battery

Note: If you have not used the battery for a long time, please charge it

first.

Caution:

Use the charger (5.3 V, 650 mA) compatible the E5 model and provided

by a designated manufacturer. If a charger incompatible with the device

model or provided by other manufacturers or vendors is used, the E5

may fail to work and dangers may be caused as well as the warrantyapplicable to the E5 and other rights may be cancelled.

If the charger is not provided in the package, you can contact your local

dealer to buy one yourself.

.

- Method 1: Charging by Using the charger


19/28

19

Method 2: Charging by Connecting to a PC

Power off the E5.

Connect the E5 and PC with a compatible data cable.

Saving Power mode If no operation is performed on the E5 for a while, the indicators are

off.

If the E5 has not been accessed for 30 minutes by default, the E5goes to the sleep mode.

When the E5 is in the sleep mode, you can press any key toactivate the E5. Then the indicators become lightened. When the E5 is in the sleep mode, the Wi-Fi is automatically

disabled.

Enabling/Disabling the Wi-Fi Function Press and hold until the indicator is on. The Wi-Fi connection is enabled.


20/28

20

Note: To disable Wi-Fi, press and hold the button until indicator isoff..

Establishing a WPS Connection

If the Wi-Fi Clients are connected with the E5 that supports WPS,

the E5 can generate a network key without manual input. Toestablish a WPS connection, do as follows:

Power on the E5. .

Start the Clients connected with the E5.

Enable the WPS function of the E5.

Note:After the Wi-Fi is enabled, press and hold Connect.Enable the WPS function of the Clients.

Note: For the Wi-Fi operations of the Clients see the Clients userguide.

User manual


21/28

21

The Wi-Fi device or computer can be connected to the Internet

through the E5.

Multi-device Access


22/28

22

microSD card Remove the rubber cap from the microSD card slot. Then insert the microSD card

into the slot.

After inserting the microSD card completely, attach the rubber cap.

Note: The microSD card is an optional accessory. If the microSD card is not provided in the package,

you can buy one yourself.

To remove the microSD card, open the rubber cap and press the microSD card gently. When the microSD card pops up automatically, take it out. Do not remove the card when it is being used. Otherwise, the card and the E5 may be damaged,

and the data stored on the card may be corrupted.

Restoring the Factory Defaults If you forget the changes of some parameter settings, you can restore them to factory defaults and

reconfigure the parameters of the E5.

Press and hold WiFi/WPSand Connect at the same time until all the indicators are off.

Then you restore the factory defaults. Note:After this operation, all personal configuration settings are deleted and all factory settings

will be restored.

User manual


23/28

23

Modem Description

Specification


Troubleshooting

Terms

Content


24/28

24

Troubleshooting

1. The modem is not installed automatically? Check your administrator and PC user rights.

Check if your PC meets the requirements.

Check if you the USB port on your PC is working properly.

Connect the modem to other ports.

The Autorun function may have been disabled on PC.

Start Autorun manually. To do that, open My Computer and start the AutoRun.exe file in the modemdirectory.

Open My Computer, right-click on Web Partner and click Autorun.

2. The Web Partner program is installed but the system can not detect the device.

Disconnect your modem from PC and then connect it again.

The drivers may have been installed incorrectly. Reinstall Web Partner.


25/28

25

Troubleshooting3. Modem is connected to the Internet and the signal indicator is on, but the Internet

connection can not be set up. Check if the connection profile has been selected correctly (Kcell Connect by default).

Check if the service is activated by your operator (Internet, High Speed Internet).

Check your account balance.

4. Slow Internet connection.

Check if the High Speed Internet service is active.

Check if you are within the area with strong 3G reception.

5. Modem does not recognize my SIM card.

Check if your SIM card is properly inserted in the modem (check the device to find out how to do itproperly).

Your SIM card may have been blocked.

Check this using a mobile phone.

When connecting the modem, enter the correct PIN number when prompted.

6. Check if you have sufficient funds in your account to cover the service fee.Note: See Help on the management program or Web management page.

Restart the E5. Restore the factory defaults.


26/28

26

Modem Description

Specification


Troubleshooting

Terms

Content


27/28

27

3G The Third Generation

CPU Central Processing Unit

EDGE Enhanced Data Rates for GSM Evolution

GPRS General Packet Radio Service

GSM Global System for Mobile Communications

HSDPA High Speed Downlink Packet Access

OS Operating System

PIN Personal Identification Number

RAM Random-Access Memory

SAR Specific Absorption RateSIM Subscriber Identity Module

UMTS Universal Mobile Telecommunications System

USB Universal Serial Bus

USIM UMTS Subscriber Identity Module

WCDMA Wideband Code Division Multiple Access

SW Software

PC Personal computer


28/28

28

THANK YOU!

wi-fi router huawei e5830 eng

Documents