dr400psia
TRANSCRIPT
-
7/31/2019 DR400PSIa
1/6
WeP DR-400 POS-0045
WeP DR-400
SLNo.
Contents
1 Product Over view2 Whats in the box
3 Consumables / accessories
4 Service Features
5 Driver and Firmware
6 Improvements done
7 Parts Compatibility with existing models
8 OS / Application testing
9 Warranty Policy
10 Training and Communication
Prepared by: Manjunath.S
Email : [email protected].
1. PRODUCT OVERVIEW
WeP DR-400 is the 42 column POS printer. Following are the highlights of thisproduct.
4.5 Lines Per Second @ 17 CPI
42 Column @ 17 CPI
16 KB buffer
Parallel Interface 400 million characters print head life
Supports Win 2000, XP, 9X
Optional USB/Serial
Specifications of the WeP DR-400
Sprints @ 4.5Lines/Sec. SupportsESC/POSCan Print upto 2.5
-
7/31/2019 DR400PSIa
2/6
WeP DR-400 POS-0045
1. Product Spec :
Printer Type
Printing Method Impact Dot Matrix
Number of Pins 9
Print Direction Bi-directional with logic seeking in text and Graphics
SN PARAMETER SPECIFICATIONS
2.1 Printing method 9 Pin SIDMP. Pins arrangement - 1 X 9 Straight.
2.2 Printing direction Bidirectional logic seeking
2.3 Printing width Max 42 columns @ 17 cpi
Max 40 columns @ 16 cpi2.5 Inch Printable Area.
2.4 Paper pathsContinuous Friction
2.5 Fonts supported Draft
2.6 Scalable fonts Nil
2.7 Pitches supported16 & 17
2.8 Print attributes supported Emphasized, Double strike, Italic, Underline, Overscore, Doubleheight, Double width
2.9 Input buffer capacity
16 KB
2.10 Printer emulations ESC/POS
2.11 Standard interfaces supported Centronix Parallel
2.12 Optional interfaces supported Serial/USB
2.13 Line feed Standard 1/6"
2.14 Inbuilt Bar code fonts Nil
2.15 Indian language printingNil
2.16 Other featuresSupports Cash draw
3.0 PRODUCT PERFORMANCE & ACCEPTANCE CRITERIA :
SN PARAMETER SPECIFICATIONS ACCEPTANCE CRITERIA
-
7/31/2019 DR400PSIa
3/6
WeP DR-400 POS-0045
3.1 Print throughput 4.5 Lines per Second @ 17Cpi Measured with Rolling ASCII characterprinting continuously in Draft mode.
3.2 Paper loadingmethod
Auto load - Friction
3.3 Print quality Horizontal dot shift
-
7/31/2019 DR400PSIa
4/6
WeP DR-400 POS-0045
5. User Manual and Driver CD6. Roll Paper (single Ply 76 mm, Start up Roll)
3.0 Consumables & Accessories
WeP DR-400 uses unique ribbon cartridge which is not common /compatible withany other printer in WeP range.Ribbon used in this printer is special 42 Column Ribbon with 4 Mtrs metersLength giving a Life of 3 Million Character
Standard Color : Black
4.0 Service Features
a. Features available through panel.
Before performing the self test , be sure that the ribbon cassette is installed and paper is loaded.To run the self test Press LF key while turning ON power. Power off to disable self testmode
Note : Hold LF key for around 3 Second & release
HEX dump mode Press LF Key while turning ON Power. Power off to disable.Printer will print HEX DUMP to indicate the hex dump modeactivated.
Note : Hold LF key for around 10 Seconds & Release
Dip Switch
WeP DR-400 has 8 DIP Switches for selection of printer settings. Followingtable describes the functioning of the switches. DIP Switches are placed at thebottom of the printer. Please turn the printer upside down to access the DIPSwitch.Switch No Function OFF ON
SW1 Black Mark Mode No Yes
SW2 Select Cutter(if Auto cutter installed) No YesSW3 Cut Mode Partial Full
SW4 Character per Line/CPI 40/16cpi 42/17cpi
SW5 Direction BI-DI UNI-DI
SW6 Two Byte Character(N/A in India) Yes No
Serial Port Settings
SW7 SW8 Baudrate
ON ON 38400
-
7/31/2019 DR400PSIa
5/6
WeP DR-400 POS-0045
OFF ON 4800
ON OFF 9600
OFF OFF 19200
Paper Handling
WeP DR-400 is designed to handle Roll Paper. Standard Roll Papersavailable in Market are: 58 mm, 76mm and 105 mm Width. Our WeP DR-400 Supports 76 mm Width Roll Papers.
WeP DR-400 is designed to Accept 1 + 1 Copy Roll Paper.
CAUTION : Roll paper Glued at the end with Cellophane Tape should notbe used. This will stick to the Pickup Roller and cause Paper Jam whenthe Roll is changed.
Printer By default is set to Accommodate single sheet or 1+1 Copywithout adjustment. No Lever Change Required for Selecting thePaper.
WeP DR-400 has Auto Load for Paper Loading. On inserting the RollPaper end in to the Paper insert Slot, Paper Picks Up Automatically.JustDrop the paper Roll inside the Place shown by arrow
How to Load the Paper?
5.0 Driver
Drivers for 95/98 , XP and Win 2000 availabe in the Driver CD.
6.0 Improvements Done
This is being the first version, Improvements will be initiated in the future versionsand variants.How
7.0 Parts Compatibility
-
7/31/2019 DR400PSIa
6/6
WeP DR-400 POS-0045
No Parts are compatible with any of our existing Printers
8.0 OS Application TestingPrinter has been tested with WINDOWS, DOS and POS Machines. Printing
applications similar to receipt printing and also tested for long print jobs andcontrol codes.
9.0 Warranty Policy
Validity: One year from the date of invoicing or 15 months from the month ofmanufacture which ever comes earlier.
Parts Covered Under Warranty:
Part Code Description
DY0008 Power adapter
BCP60 Logic Board
DY00017 Assembled Frame with head
WeP would be giving full product replacements for the first 3 months period tillDec 06 against any failures in the product. There after will continue with theusual method of parts replacement.
Life time support : This product will be supported for a minimum period of 2years from the last day of sale
10.0 Training and communication:
Regional training will be conducted for all ASPs within 30 days of launch of thisproduct.